Примеры использования Conductivity measurement на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
PH and conductivity measurement in demineralization.
The M400 2-wire transmitter is a single-channel, multi-parameter unit for pH/ ORP,oxygen and conductivity measurement.
PH and conductivity measurement in reverse osmosis RO.
Transmitter power supplies transfer the signals concerning water level, flow measurement, pH value, and conductivity measurement.
The conductivity measurement relates to a water temperature of 25 C.
You can compensate the conductivity measurement for temperature.
The conductivity measurement is based on a water temperature of 25 C.
Conductivity measurement range according to the sensor used 0,5- 100.000 µS/cm.
A conductivity measurement cell may be connected only to a conductivity meter input.
Conductivity measurement The controller is equipped with a conductivity meter, enabling the conductivity of the permeate to be measured and monitored.
In the inventory you can indicate if the conductivity measurement cell is connected and what the sensor cell constant is.
Temperature compensation The controller is not equippedwith a thermometer and an automatic temperature compensation function for the conductivity measurement reading.
Power Plant Conductivity Measurement in Water Treatment and Cycle Chemistry.
This can be linked to a“conductivity cell” for a temperature compensation of the measured conductivity value see§ 6.6.6“Properties conductivity measurement” on page 32.
In-line conductivity measurement is an excellent indicator of contaminants in fresh water.
Full Intelligence: Instrument adopts high-precision AD conversion andsingle chip micro-processing technology to achieve the conductivity measurement, temperature measurement, automatic temperature compensation, automatic range conversion and other functions.
In most cases, conductivity measurement in water solutions indicates the concentration of dissolved salts.
The integrated conductivity sensor solves many of the most common challenges with conductivity measurement in a water treatment system, such as determining which cell constant to use, what calibration data to enter and what spare parts to maintain.
Conductivity measurement range and limits of permissible errors apparatus K507 conductivity measurement in the process of checking the voltage transformers are indicated in Table 3.
Global pharmacopeias require that conductivity measurement systems are periodically calibrated to ensure their precision.
The window for the conductivity measurement-related settings is again divided into:- Properties(conductivity measurement properties)- Temperature(temperature compensation)- Monitor Min.(monitoring of the minimum conductivity)- Monitor Max.(monitoring of the maximum conductivity) 6.6.6.
The temperature measurement is connected to the conductivity measurement and the settings are relevant only if the conductivity measurement cell is also connected.
To check whether the conductivity measurement is functioning correctly, you can always program a lower and an upper threshold limit value with a programmable delay.
For the function control of the conductivity measurement a lower limit can be set and for the quality control of the water an upper limit can be programmed.
At other temperatures the conductivity measurement must be adjusted by means of a manual correction factor, or if a temperature sensor is installed, an automatic correction factor.
In addition to the conductivity measurement and monitoring-related settings, the temperature-related settings will also appear, if you use a passive, capacity measuring cell.
In order to check that the conductivity measurement is working properly a threshold can be set for each range; a ceiling can also be set for checking the quality of the permeate.