Примеры использования Electric machine на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Electric machine power loss.
Thermal capacity for electric machine mass.
Electric machine system model.
To restore blade better than an electric machine.
Electric machine characteristics.
Mem, des is the desired electric machine torque, Nm.
Electric machine rotational inertia.
The efficiency of the electric machine system shall be calculated as.
Electric machine model parameters and interface.
Indicators of JSC«Large-Size Electric Machine Plant» th. UAH, p.p.
Test electric machine and its controller.
Τem, heat is the thermal capacity for electric machine thermal mass, J/K.
The electric machine torque shall be limited as follows.
Rem, th is the thermal resistance between electric machine and its cooling medium, K/W.
The electric machine and its entire equipment assembly shall be conditioned at a temperature of 25 °C+- 5 °C.
Evolution of a combined method of the electric machine analysis(in Russian).- Elektrotekhnika. 2007.
Electric machine use reduced operating costs in comparison with a diesel analogue to approximately 95.
Attribute Definition: Requirements for recycling and/or reusing vehicle components and/or electric machine.
Mapping of electric machine torque and power maps.
RA«Expert-Rating» has decided to confirm the rating of the bond issue of Series C of Private JSC«Large-Size Electric Machine Plant» at the level uaВВВ.
An electric machine can generally be divided into three parts, the stator, rotor and the power electronics.
RA«Expert-Rating» confirms the credit rating to bonds of Private JSC«Large-Size Electric Machine Plant» at the level uaВВВ.
The electric machine model shall also include an inertia load Jem that shall be added to the total powertrain inertia.
The battery model provides a thermodynamics model that may be used andapplies similar modelling as for the electric machine system in accordance with.
The test electric machine including its controller(high power electronics and ECU) shall be in the condition described below.
However, if its in-vehicle layout is not possiblein the test cell, the wiring may be altered within a range not improving the electric machine performance.
The test electric machine and controller shall be serviced in accordance with the inspection and maintenance procedures.
The torque map andelectric power consumption map of the electric machine shall be determined and converted to table data as the input parameters for the HILS system electric machine model.
Electric machine" means an energy converter transferring electric energy into mechanical energy or vice versa for the purpose of vehicle propulsion.
Based on its power loss Ploss, em, the electric machine model provides a simple thermodynamics model that may be used to derive its temperature Tem as follows.