SALLITTU POIKKEAMA на Английском - Английский перевод

sallittu poikkeama
allowable deviation
sallittu poikkeama
allowed deviation
permitted deviation

Примеры использования Sallittu poikkeama на Финском языке и их переводы на Английский язык

{-}
  • Colloquial category close
  • Official category close
  • Medicine category close
  • Financial category close
  • Ecclesiastic category close
  • Official/political category close
  • Computer category close
  • Programming category close
Sallittu poikkeama kussakin suunnassa on 10 yksikköä.
Permissible deviation in each direction is 10 units.
Stainless ruostumattomasta teräksestä valmistetun putken koko 304 ja sallittu poikkeama.
Stainless steel tube size and allowable deviation.
Sallittu poikkeama ulkohalkaisija titaani putki mm.
Allowable deviation of outer diameter of titanium pipe mm.
Kun tarkkailun kahden metrin teline keraamisia pinnoitteita sallittu poikkeama.
When checking the two-meter rack ceramic coatings permitted deviation.
Pituus sallittu poikkeama on+ 20mm. kaksinkertainen pituus olisi.
Length allowable deviation is+ 20mm; double length should also be.
Seinien ja kattojen päällysteet valmistettu kipsilevymarkkinoihin sallittu poikkeama.
For wall and ceiling coverings made of dry plaster allowed deviation.
Ainoa sallittu poikkeama, jossa perinteiset wells ei voidaan porata.
Only allowed under a deviation where conventional wells can not be drilled.
Elementti Kemiallinen koostumus(massafraktio)/ määräykset Sallittu poikkeama.
Element The provisions of chemical composition(mass fraction)/% The allowable deviation.
Ming titaani kemiallisen koostumuksen sallittu poikkeama GB/T3620.2 säännösten kanssa.
Ming titanium chemical composition allowable deviation with GB/T3620.2 provisions.
Pienin sallittu poikkeama vaakasuorasta riviä lohkon enintään 15 mm 10 metriä muuraus.
The minimum permitted deviation from the horizontal rows of block no more than 15 mm per 10 meters of masonry.
Taulukon valu titanium-ja titanium seos koostumus sallittu poikkeama GB/T 15073-1994.
Table casting of titanium and titanium alloy composition allowable deviation from GB/T 15073-1994.
Putken seinämäpaksuus sallittu poikkeama saa olla enintään 12, 5 prosentin nimellinen seinämän.
The allowable deviation of the wall thickness of the tube shall not exceed 12.5% of the nominal wall.
Laajuus tasaisuus, voit tarkistaa kahden metrin teline tason ei sallittu poikkeama> 4 mm.
The extent of its flatness, you can check two-meter rack-level not permitted deviation> 4 mm.
Suunta Etelälaidalla(sallittu poikkeama 30 °) sijoitettu olohuone, joka on lämmin ja valoisa.
Orientation On the south side(allowed deviation of 30 B°) placed living room, which should be warm and bright.
Tarkastus ostajan KunMing titaani kemiallisen koostumuksen sallittu poikkeama on GB/T3620.2.
Inspection by the buyer,the Kun Ming titanium chemical composition allowable deviation with GB/T3620.2.
Pituus sallittu poikkeama on+ 20mm. kaksinkertainen pituus olisi sisällytettävä Baari viilto, kunkin.
Length allowable deviation is+ 20mm; double length should also be included in the bar of the incision, each.
Olennainen korjaus on rakenteen mekaanisen kestävyyden ja stabiilisuuden sallittu poikkeama.
Essential correction is the limits of permissible deviation for the mechanical resistance and stability of the structure.
Kun ehdotus on tarpeen, sallittu poikkeama Yunchtitanium Kemiallinen koostumus on noudatettava säännöksiä GB/T3620.2.
When the requisition is required, the allowable deviation of the chemical composition of Yunchtitanium shall comply with the provisions of GB/T3620.2.
Vaihtoehtoisesti poikkeama voitaisiin seurata, kuulostava hälytysäänisignaalilaitetta taijopa katkaisemalla jos sallittu poikkeama ylittyy.
Optionally the deviation could be monitored, sounding an audible alarm signal oreven cutting off the power if the allowable deviation is exceeded.
Edellä 2 kohdassa tarkoitettu 15 prosentin sallittu poikkeama lasketaan miekkakalojen lukumääränä aluksen koko miekkakalasaaliista kutakin purkamista kohti.
The tolerance of 15% referred to in paragraph 2 shall be calculated on the basis of the number of swordfish of the vessel's total swordfish catch per landing.
Italian olisi parannettava rakenteellista rahoitusasemaansa vuonna 2016 vähintään 0,1 prosenttia suhteessa BKT: hen, kun otetaan huomioon rakenneuudistuslausekkeeseen perustuva sallittu poikkeama.
In 2016, Italy should improve its structural balance by atleast 0.1% of GDP, taking into account the allowed deviation based on the structural reform clause.
Eri typpimuotojen ilmoitettujen pitoisuuksien tai fosforipentoksidin ilmoitettujen liukoisuuksien sallittu poikkeama on yksi kymmenesosa kyseisen ravinteen kokonaispitoisuudesta( enimmäisarvo 2 massa-%) edellyttäen, että kyseisen ravinteen kokonaispitoisuus pysyy liitteessä I ja edellä esitetyissä sallituissa poikkeamissa asetetuissa rajoissa.
The tolerance allowed in respect of the declared content for the various forms of nitrogen or the declared solubilities of phosphorus pentoxide is one-tenth of the overall content of the nutrient concerned with a maximum of 2% by mass, provided that the overall content of that nutrient remains within the limits specified in Annex I and the tolerances specified above.
Nykyisin lainsäädännössä edellytetään, että muille eläimille kuinlemmikeille tarkoitetuissa rehuseoksissa käytetyt rehuaineet luetellaan prosentteina painosta(sallittu poikkeama on+/- 15%) alenevassa järjestyksessä.
The legislation currently requires that feed materials used in compound feeds for animals otherthan pets be listed, in descending order, with the percentages by weight with a tolerance of+/- 15.
Результатов: 23, Время: 0.0381

Как использовать "sallittu poikkeama" в Финском предложении

Aikuiselle sallittu poikkeama normaalista on 300 ml.
Katkaisutoleranssi on pituuden sallittu poikkeama halutusta mitasta.
Sallittu poikkeama suhteesta voi olla enintään 1%.
Bitumipitoisuuden suurin sallittu poikkeama ohjearvosta yksittäisessä näytteessä.
Toleranssi Sallittu poikkeama määrätystä arvosta, sallittu vaihteluväli.
XTE:Maksimi sallittu poikkeama joka yhdistetään uuteen reittipisteeseen.
Suurin sallittu poikkeama kappaleittain mittaukseen perustuvissa mittausmenetelmissä.
Suurin sallittu poikkeama muodostelmien mittaukseen perustuvissa mittausmenetelmissä.
Tällöin suurin sallittu poikkeama keskilinjasta on 0,46 m.
Suurin sallittu poikkeama saa olla enintaan 1,0 mm.

Как использовать "allowed deviation, allowable deviation, permitted deviation" в Английском предложении

Nonetheless, the withdrawal of Siemens allowed deviation for the contract agreements into the project.
Each time you raise, you're increasing the allowed deviation by about 1.5x.
Other clients were more laid back, and allowed deviation and slowness to occur.
Precision is not the allowed deviation between student and correct answers; that is Tolerance.
Curve fit tolerance - This is the maximum allowable deviation from the parent curves.
The sub-floor must be even – the allowable deviation is ±2mm per (2) metres with WiseLoc lock system products.
ASTM and the ACC for the API allows permitted deviation before a failure is recorded.
Electoral districts try to represent 104,763 residents, with an allowable deviation of 25 per cent either way.
The Republicans, in drawing their plan, narrowed the allowed deviation among districts to plus or minus 1 percent.
The projection indicated that the hole, continuing its present course, would be at the maximum allowable deviation tolerance.

Пословный перевод

sallittiinsallittu vain

Лучшие запросы из словаря

Финский - Английский