Примери за използване на Adhesive can на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Patented adhesive can be reused.
The technology of preparing the adhesive andlaying the floor covering on the adhesive can be learned from a video on youtube.
This adhesive can leave marks on the surface.
In many cases, the same adhesive can be used for both.
The adhesive can be used as a mixture of gypsum slow solidification.
In addition to polymers,pure vinyl adhesive can include cellulose particles, biocides, etc.
Adhesive can be removed from the denture by brushing with soap and water.
When open, solvent based adhesive can be stored for up to 15 minutes.
The adhesive can be applied directly from the container, and the curing reaction begins as soon as it comes into contact with moisture.
For example, a“roundable” hot melt adhesive can be used to create a rounded spine on Smyth-sewn books.
The purpose of this primer is to regulate the absorbency of the underlying material so that the tile adhesive can cure properly.
Fresh tile adhesive can be washed off with water and sponge.
Whether you want to install natural stones, such as polygonal plates, granite orceramic tiles, the adhesive can be applied directly to the fleece.
Polyurethane adhesive can be either single or double-bonded.
Tip: For a concrete floor,it may be necessary to apply a leveling layer of at least two millimeters to the substrate so that the adhesive can later set safely.
Made from CMC adhesive can leave white sugar stains when drying.
So, no longer need to install the living room chandeliers and the cost of drilling on the ceiling line,thin OLED lamp or even double-sided adhesive can be easily fixed on the wall.
Tile adhesive can be anything, but do not rush to outright cheap.
When bonding the thermal insulation boards, the adhesive can be applied both on the board and on the base.
The dispersion adhesive can be used for laying linoleum on different bases: fabric, felt, polyurethane foam.
If there is a possibility of a capillary rise in moisture, then this adhesive can be used only under the condition of high-quality vapor barrier.
The adhesive can be applied either spread on the whole surface by means of a notched trowel, or„on-bead“ by using a gun, that is in longitudinal continuous lines spaced 120-150mm.
Though I often put mine on my skirt because the adhesive can damage finer fabrics, like the linen in the victim's suit.
Fully cured adhesive can be cleaned, but in this case, the stripped surface must be painted as damaged film easily transmit moisture, and this is a very negative impact on the structure of the adhesive. .
The best temperature to proceed with the cladding is 5-25 degrees Celsius, so that the adhesive can dry properly and ensure that the stones are safely attached to the wall.
Therefore, silicone structural adhesive can be widely used in the bonding of metal, ceramic, plastic, rubber and wood with the same kind of materials or between different kinds of materials.
The only exception for which contracting a specialized company is recommended is if the adhesive can not be removed without damaging the wall and you do not want to repaint yourself.
How a denture adhesive can help with common denture issues.
The effectiveness of the adhesive can also be very poor if inferior products are used.
Leave joints in between the stones, so that the adhesive can be absorbed properly and so that you can apply more adhesive in the joints, if necessary.