Примери коришћења Rotational speed на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Rotational speed continuously regulated.
A device is started,on which it is necessary to measure the rotational speed.
Rotational speed and methods of its regulation.
If hard to operate the machine,then the rotational speed sensors may fail.
Rotational speed of the milling machine 7500 revolutions/ min.
The tool used in everyday life can have a rotational speed of 400 rpm.
Rotational speed of the cutting spindle 8500 revolutions/ min.
If the screw diameter is 6 mm,then the rotational speed during screwing will be 10 Nm.
If the rotational speed is too high, the grindstone may break.
When transmitting rotation from a small gear to a large rotational speed decreases.
The rotational speed of the cartridge should be as low as possible.
The latest devices are equipped with a smart controller that controls the rotational speed.
When measuring the rotational speed, the following actions are performed.
The friction coefficient of deep groove ball bearings is very small and the limit rotational speed is also high.
Rotational speed- it depends on what material you can cut with a saw.
On the market are models whose rotational speed ranges from 230 to 2300 revolutions per minute.
Rotational speed of milling aggregate(braid) 16796 revolutions/ min.
When the Moon first formed, its rotational speed and orbit were very different than they are now.
Rotational speed of the envelope milling machine(special equipment) 17500 revolutions/ min.
The gasoline engine has a higher rotational speed, at high revs the engine causes minimal damage.
The rotational speed is sufficient for the wood to be processed quickly and efficiently.
At the same time, compact models for home use have a higher rotational speed than those used for professional tasks.
The rotational speed of the engine can be adjusted, and this is the main advantage of the device.
When choosing a cordless or network screwdriver,it is important to correctly determine the ratio of the screw diameter and rotational speed.
Motor power affects rotational speed, power, drilling productivity and other important parameters.
As the Moon's distance from the Earth increases and decreases,its angular speed changes, while its rotational speed stays the same.
Note that the rotational speed of a three-phase electric motor operating in a single-phase network does not change much compared to the rotational speed of a motor in three-phase mode.
The application interface is intuitive, includes monitoring tools for installed temperature sensors,voltage and rotational speed of coolers.
You can rise above the saddle and fall on it,change the resistance of the pedals and their rotational speed, sit with your back straight in the“walking” mode, or lean forward in acceleration;
Over time, the Earth's gravitational field gradually slowed the Moon's rotation until the orbital period and the rotational speed stabilised.