英語 での Current limit の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Charge Current Limit.
Current Limit protection function.
Protection: current limit.
The current limit is $14.3 trillion.
EXC. MAX: Excitation Current Limit.
人々も翻訳します
Peak Current Limit(A).
Selectable device current limit.
The current limit is five.
KHz operation with accurate current limit.
Selectable current limit through BP/M capacitor value.
Cycle-by-cycle power switch current limit.
Higher current limit extends peak power or, in open frame applications, maximum continuous power.
Remote battery current limit activated.
The TPS61046 has typical 900-mA switch current limit.
Adustable cycle-by-cycle current limit for both FREDFETs.
The accurate current limit is set to 30mA, making the part ideal for protecting the sensor reading devices.
Patented Wind turbines stall current limit control technology.
It also lets the battery serve as a storage buffer,supplying load peaks that may momentarily exceed the input current limit.
Charge current and DC converter output current limit can be set up to 2A, respectively.
When the input current limit or voltage limit is reached, the power path management automatically reduces the charge current to zero.
Combined with the output overvoltage and undervoltage protection features, this current limit ensures robust output supplies.
The MAX8570 and MAX8572 use a 110mA current limit to reduce ripple and component size in low-current applications.
In addition, it is possible to customize each voltage system,control port number, current limit value, cutoff response time.
Checking both data sheets, the peak-switch current limit of the MAX17504 is typically 5.1A versus 3.5A for the MAX17503.
Smaller values also give higher peak currents, which must remain below the MAX8646 minimum specified current limit to avoid loss of regulation.
There is a''soft'' limit(also called the current limit) and a''hard limit''(also called the upper limit).
A programmable input current limit, invoked using the GSMB control, reduces the total current drawn from the battery during PA transmit events.
The controller also provides fast(cycle-by-cycle) current limit, input and output OVP, plus advanced thermal management circuitry.
Charge current and SYS output current limit can be set up to 2A while USB input current can be set to 100mA or 500mA.
The TLV713P-Q1 limits the input current to the defined current limit to avoid large currents from flowing from the input power source.