英語 での Measurement conditions の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Set the measurement conditions.
The following table summarizes the measurement conditions.
Measurement conditions are same.
Under Nikon's measurement conditions.
Measurement conditions Meets IS013655 measuring conditions. .
Table 1 shows the measurement conditions.
XPS measurement conditions are as follows.
(The above values vary depending on the measurement conditions.).
And other measurement conditions.
Multilayer film can be set up to 5 layers of measurement conditions.
Measurement conditions Luminous Flux 10 lm(lumens) or over(monochromatic).
Multilayer film can set measurement conditions of up to 5 layers.
Measurement Conditions Compliance with ISO 13655 measurement conditions;
Multilayer film can set measurement conditions of up to 5 layers.
Both instruments are Micro-XRF spectrometers but use different measurement conditions.
The setting of measurement conditions are able to be saved to an SD card.
Digital Output Capture IPmay not operate correctly under specific measurement conditions.
Improved the way to specify the measurement conditions for analysis algorithm shmoo.
Measurement conditions The star topology shown below was used to evaluate the radiated noise.
Adaptable to the demands of various materials and measurement conditions by means of exchangeable apertures and filters.
Capture Range Extension Plugin for Digital Output Capture IPmay not operate correctly under specific measurement conditions.
Repeatability Standard deviation within ΔE*ab 0.07(Measurement Conditions: Average of 30 measurements of standard white plate).
Best measurement conditions for your sample Temperature, humidity, and external vibrations have strong influences on FTIR spectroscopy.
The measurement procedure using the READ? is flexible in that the measurement conditions can be specified in detail.
Also, in the measurement conditions it is possible to set PDOP and RMS thresholds, as well as the GNSS positioning status and measurement frequency.
The time described is our evaluation results(average value). Numerical valuemay be different depending on the PC and measurement conditions to be used.
By connecting the LC-8000A series to a PC, settings of GPS and measurement conditions, logging of speed, distance and other measurement items are enabled.
Two dial gauges that allow precise setting and control of the contact pressure of the probe pins,thus enabling easy reproduction of the measurement conditions.
The test specification includes ideal measurement conditions, large gaze angles, and different illumination sets and head positions in the head movement box.
Please indicate the purpose of the measurement, sample information(shape, dimensions,material, etc.), and measurement conditions as fully as possible.