英語 での The maximum torque の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The maximum torque is 350 Nm.
Over 70 per cent of the maximum torque is available from 1 500 rpm.
The maximum torque is 580 Nm.
Our kelly bars transfer the maximum torque over the full extended length.
The maximum torque is 520 Nm.
But we also learn that narrowing by 4 mm or3 mm will reduce the maximum torque.
The maximum torque is up to 250 Nm.
The maximum torque is reached at 3,500 rpm.
Integrated design of planet carrier and output shaft ensures the maximum torque stiffness and stability.
The maximum torque is Nm 850. And the consumer?
(1)Integrated design of planet carrier and output shaft ensures the maximum torque stiffness and stability.
The maximum torque of the new engine is 108N·m.
The maximum torque of 280 Nm is available between 1.900 5.000 and turns.
Over 70% of the maximum torque is available from just 1,500 rpm.
The maximum torque of 550 Nm provides even better acceleration and flexibility values.
At the same time, the maximum torque is increased from 900 to 970 Nm.
The maximum torque of 550 Nm provides even better acceleration and flexibility values.
At the time of engine control, the maximum torque and exhaust temperature become high and the filter becomes hot.
The maximum torque of 550 Nm provides even better acceleration and flexibility values.
Selecting motor types by evaluating the maximum torque and maximum output required while considering motor geometry and configuration from the viewpoint of efficiency and cost.
The maximum torque figure stands at 43.84 mkg, available between 1,500 and 2,500 rpm.
We increased the maximum torque in the low engine speed range by about 40%, compared with the current model," the company said.
The maximum torque reaches 56 mkg, increasing by 40% the available its predecessor.
The maximum torque was practically the same(290 Nm), but also slower rate: 2500 rpm.
The maximum torque of 430 Nm provides even better acceleration and flexibility values, and is available between 1,900 and 5,000 rpm.
The maximum torque of stepping motors is usually defined as the startup torque at a pulse frequency of 10 Hz.
The maximum torque for a motor will depend on the maximum current although this will usually be only usable until thermal considerations take precedence.