Usually maximum three discharging doors are available.
Freeformer根据标准配备了两个卸料单元。
The Freeformer is equipped with two discharge units as standard.
不要使用压缩空气填充、卸料或转动.
Do NOT use compressed air for filling, discharging, or handling.
皮带输送机固定以后,可装设给料和卸料装置。
After the conveyor is fixed, the feeding and unloading devices can be installed.
这时应提高冲头强度,增强卸料板的引导保护。
At this time should improve the punch strength,enhance the guidance of the discharge board protection.
无论采用何种进气阀,卸料时应将油箱压力保持在1.0~2.0。
No matter what kind of intake valve, the tank pressure shouldbe maintained at 1.0~ 2.0 when unloading.
第四种、卸料过程中,滤板两侧残留的过滤泥饼量相差较大。
During the unloading process, the amount of mud remaining on both sides of the filter plate greatly differs;
卸料台(通道口)平整,安全门齐全,两侧边防护严密良好。
Unloading station(channel mouth) formation, safety doors complete, both sides of the border tightly guarded.
件,耐磨材料和使用固定的卸料装置应作为在低转速尽可能远。
Broken and worn materials and fixed plow-type unloading devices should be used at the lowest possible speed.
卸料时,铲斗应尽量放低,但又注意不得碰撞汽车的任何部位。
Unloading, the bucket should be as low as possible, but also pay attention not to crash any part of the car.
便于在不同位置加载或卸载,即可以设置多个加料口或卸料口。
Easy to load or unload at different locations, that is,you can set a number of feeding port or discharge port.
卸料时,挖斗应尽量放低,但又注意不得碰撞汽车的任何部位.
Unloading, the bucket should be as low as possible, but also pay attention not to crash any part of the car.
从原料到成品的混凝土工艺是计量输送-进料-搅拌-卸料。
The process of concrete from raw material to finished product is metering- conveying- feeding- stirring- material.
卸料时,铲斗应尽量放低,但又需注意不得碰撞汽车的任何部分。
Unloading, the bucket should be as low as possible, but also pay attention not to crash any part of the car.
搅拌车的装载能力应与搅拌机的卸料能力相匹配。
The loading capacity of the mixer truck should match the discharge capacity of the mixer.
的进料、分离、卸料等工序是在全速运转下连续自动进行的。
The processes of feeding, separating, and unloading of the machine are continuously and automatically performed at full speed.
工件清理完毕后,可以自动卸料,降低了工人的劳动强度。
After the workpiece is cleaned, the material can be unloaded automatically, which reduces the labor intensity of the workers.
循环作业式的供料、搅拌、卸料三道工序是按一定的时间间隔周期进行的,即按份拌制。
Recurrence type feeding, mixing and unloading three processes is carried out at a certain time interval cycle, that is, mixing.
搅拌筒的进出料系统(装料和卸料机构):是辅助搅拌筒工作的重要装置。
Mixing and discharging system of the mixing drum(loading and unloading mechanism): It is an important device for assisting the mixing drum.
在使用中,需要大量的劳动力来配合运送材料,卸料时间较长,拌合鼓清洗较困难。
In use, need a lot of labor to cooperate with the delivery of materials, unloading time is longer, mixing drum cleaning is more difficult.
循环操作模式下的进料,搅拌和卸料三个过程是按一定时间间隔的周期进行的,即按部位混合。
Recurrence type feeding, mixing and unloading three processes is carried out at a certain time interval cycle, that is, mixing.
星型卸料器是目前国内最先进的卸料装置,常用在除尘系统中作为除尘系统的重要设备之一。
Rotary feeder is the most advanced discharging device currently and commonly used as one of important equipment in dust removal system.
控制箱有四组共十一个控制按钮,按动这些控制按钮即可控制上料,供水、卸料搅拌系统工作。
Control box has four groups a total of ten control button, pressing on the control button to control feed,water, discharging mixing system work.
若打算在某一中途卸料场从外包装物或货物容器内卸出货包,则必须提供相应的运输文件;.
If packages are to be removed from the overpack orfreight container at a point of intermediate unloading, appropriate transport documents shall be made available;
但由于操作中要多次装料和卸料,因此不适用于烘干易粘着输送网带及不允许碎裂的物料。
However, due to multiple loading and unloading during operation, it is not suitable for dry-easy-adhesion conveyor belts and materials that are not allowed to crack.
Since July 2019, we have completed key infrastructure, including the central heating plant,the shaft 2 jaw crusher system and the surface discharge conveyor.
The Russian-built four-legged platform will deliver around 35kg of scientific equipment to the lunar surface andrelease a 15kg Indian-built robotic rover.
English
Bahasa indonesia
日本語
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt