영어에서 Flame spread 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Lateral flame spread.
Flame spread(Fs).
I is the value of sum of the three periods flame spread index.
Flame spread Class 1.
UL 1685 Bunched Cable and Wire Vertical Flame Spread Testing Equipment.
Flame spread< 25.
Security Bunched Cable/ Wire Vertical Flame Spread Test Equipment UL 1685.
A Flame Spread Index 20.
Single Cable and Wire Testing Equipment Vertical Flame Spread Tester IEC 60332-1.
External Flame Spread- ASTM E108.
BS 476 Part 7 Flammability Testing Equipment/ Surface Flame Spread Test Apparatus.
Flame spread(Fs) Surface mm≤150 30 Compliant.
Since the tested sample received a Flame Spread Index 20 and a Smoke Developed 450.
Flame spread is determined visually through windows built into the tunnel.
Surface Flammability Test Equipment,HTB-048 Radiant Panel Flame Spread Test Apparatus.
Surface Flame Spread Fire Testing Equipment For Building Materials AC220V 50HZ.
Electric Building Material Fire Tester Surface Flame Spread Test Equipment BS 476 Part 7.
The unique fabric of the Econofrost 9000 series utilizesa woven aluminum foil laminated to a polyethersulfone backing for strength, hygiene and flame spread resistance.
Meets UL94 5V, UL 1975 and has a flame spread of 20 according to ASTM E84.
Good fire-resistance----CPVC with good self-extinguishing feature, the limiting oxygen index is 60, no flam drip,limit flame spread and smoke's generation.
Fire Safety on Flame Spreading Over Liquid Fuels.
This cable has passed vertical burning test and has good flame spreading resistance.
Since the tested sample received a Flame Spread Index 20 and a Smoke Developed 450, it would.
Such interior finish materials shall be grouped in the following classes in accordance with their flame spread and smoke-developed indexes.
Since the tested sample received a Flame Spread Index 20 and a Smoke Developed 450, it would meet the requirement of Class A interior Wall& Ceiling Finish Category.
Low Flammability- Celtec meets UL94 5V, UL 1975 and has a flame spread of 20 according to ASTM E84.
Exception: When the interior trim material has been tested as an interior finish in accordance with NFPA 286 and complies with the acceptance criteria in Section 803.1.2.1, it shall not be required to be tested for flame spread index in accordance with ASTM E 84 or UL 723.
INTRODUCTION Vertical Flame Tester is suitable for the measurement of limited flame spread properties of Protective clothing….
Good fire- resistance--- CPVC with good self-extinguishing feature, the limiting oxygen index is 60,no flam drip,limit flame spread and smoke's generation.
The National Fire Protection Association(NFPA) 285 fire test is a large-scale wall assembly test used to determine the potential for flame spread from one story of a building to another through the exterior wall.