영어에서 To be cut 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Personal income taxes to be cut.
Material to be cut steel wire or FRP strength member.
Pin that area. That needs to be cut, as well.
Easily to be cut, insulated, tempered and coated.
I can't say exactly what needs to be cut.
Easy to be cut, drilled, nailed, sawed, and riveted.
Excel transferred the pdf to be cut into multiple files because.
And that the smartphone budget will be the last to be cut.
Excel transferred the pdf to be cut into multiple files because.
Easy to be cut, drilled, nailed and riveted. DIY is all right.
Half carcasses of such animals need to be cut into two parts.
It does not need to be cut, because its height reaches a maximum of 80 mm.
It then compiles them into shapes ready to be cut by the robot.
Total length of PCB to be cut- 300 mm Online Pcb Cutter Machine Feature.
The detector head can be separated, but the belt do not need to be cut.
That's because it never needs to be cut, watered, or fertilized.
To be cut from the same cloth- to be very similar.
Half carcasses of such animals need to be cut into two parts. Total get 4 pieces.
Easy to be cut, drilled, nailed, sawed, and riveted. DIY is all right.
This allows various materials such as carbon-fibre or rubber products to be cut cleanly.
Finally, the pure ice block need to be cut into pieces of ball ice by ball ice cutting machine.
Then, the baked wrapper belt will be cooled at once, ready to be cut and stacked up.
For instance, if the material to be cut is a hard metal like stainless steel, shallow flutes and a square cutting edge will be optimal.
It was the first one that is large and pure enough to be cut and shaped.
These artificial grasses don't require to be cut and they don't need pesticides or fertilizers, hence they are very much safe for kids to play over it.
However, ceramic knives are not suitable for cooking foods that need to be cut and simmered.
Thickness(from100㎛ to 200㎛), meantime possible to be cut according to the customer's need with size.
The technical department will help selecting the most suitable steel or carbide tool for the material to be cut.
In addition, when you have found the same act, there is a case to be cut from this system available terminal without notice.
The focal position and other parameters are automatically tailored to the material to be cut. Quality.