Examples of using Standard test method in English and their translations into French
{-}
-
Colloquial
-
Official
Standard Test Method for.
All data are based on Canon's Standard Test Method.
ASTM Standard Test Method D3624- 85a.
All data is based on Canon's Standard Test Method.
Standard test method for evaluating degree of rust.
Where can I get a copy of the Standard Test Method?
The standard test method referred to in subsection 3(2);
These regulations incorporateby reference document D3231-13, entitled“Standard Test Method for Phosphorus in Gasoline..
Standard Test Method for Ash from Petroleum Products.
As a general rule, the permeability to moisture should be less than 0.01 ASTM(American Standard Test Method) units.
Standard Test Method for 90 Degree Peel Resistance of Adhesives.
ASTM D1173- 07(Reapproved 2015): Standard Test Method for Foaming Properties of Surface-Active Agents.J.
Standard Test Method for Cloud Point of Petroleum Products.
For certain applications, it may however be adjusted if desired.Refer to ASTM D 2845- Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock.
Standard test method for practical washability of organic coatings.
The declared vibration emission values stated in the technical data andthe declaration of conformity have been measured in accordance with a standard test method provided by EN 786 and may be used for comparing one tool with another.
A standard test method must be used to obtain consistent results.
The declared vibration emission values stated in the technical data andthe declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another.
Standard test method for fracture at a seam of woven garment fabrics.
ASTM D 1590/ Standard test method for surface tension of water.
Standard test method for evaluating properties of impact resistance.
ASTM D695- Standard Test Method for Compressive Properties of Rigid Plastics.
Standard test method for tearing force of fabrics(trapezoid method. .
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials.
Standard Test Method for Evaluating Degree of Blistering of Paints.
ASTM E2848-11- Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance.
Standard test method for Optical Density of Smoke Generated by solid materials.
This simple standard test method characterizes the oxidation stability of oils, fats, fuels or polymers.
Standard test method for assessing the ignition propensity of cigarettes ISO 12863:2010.
CSA A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems.