Examples of using The ethernet cable in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
The ethernet cable still works.
Firmly plug one end of the Ethernet cable into the printer.
Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
disconnect the Ethernet cable.
I permanently plugged the Ethernet cable to the Raspberry Pi.
The Ethernet cable RJ45 with standard plug, is not a
Firmly plug the other end of the Ethernet cable into the network hub
The ethernet cable can meet the needs of different environments
Ensure that the light corresponding to the LAN port where the Ethernet cable is connected to is lit.
Once you connect the Ethernet cable, OS X automatically configures your connection using DHCP.
or when the Ethernet cable is disconnected and reconnected.
Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
Featuring real signal and lossless data transmission, the Ethernet cable meets the current
Enables the Ethernet cable to carry both data and power beyond the 100 meters limitation for another 100 meters.
make sure the Ethernet cable is disconnected.
Connect the other end of the Ethernet cable to an available Ethernet port on a router
file transfers became slow if the Ethernet cable was disconnected from the TeraStation when replicating too many files.
By connecting the Ethernet cable from your router to the LAN port of A18,
it's often hard to focus on the task in hand without unplugging the ethernet cable from your laptop or disabling the WiFi!
Connect one end of the Ethernet cable to the router and the other end to the Ethernet socket on the television.
where perhaps there are so kind like this information point, or perhaps let us with the ethernet cable from inside if we have time,
Disconnect the Ethernet cable from Apple TV. Then in Settings,
The ethernet cables that we employ in the single day using two pairs of copper of the four available inside wiring,
unplug the DSL line, and then plug the Ethernet cable to the Ethernet WAN port as the existing CPE VMG8924-B10A will be used to terminate the IP connections via the WAN interface.
Finally, the yellow ethernet cable.
That attaches to the device? An Ethernet cable.
Attach the print server to the network using an Ethernet cable.
Connect the mains cord, Ethernet cable and the aerial or satellite cable depending on your setup.