存器 英语是什么意思 - 英语翻译

• register
• registers

在 中文 中使用 存器 的示例及其翻译为 英语

IOC5和IOC6均为可读/写寄存器。
IOC5 and IOC6 registers are both readable and writable.

它确保了长时间内的常数据寄存器的安全性。
It ensures security of constant data register in the long time period.

当数据由从站接收时,它将一点一点地写入序列/并行寄存器。
As data is received by the slave it is written bit by bit to a serial/parallel register.

E寄存器管理当前变量环境，它指向一个列表的列表。
The current variable environment is managed by the E register, which points at a list of lists.

分配给4x寄存器的输出在PLC停止或启动时会保持其当前值。
Digital outputs that assigned 4x registers keep their current value when the PLC is stopped or started.

当写入访问被启用或解锁时，读取GPIOLOCK寄存器返回0x00000000。
When write accesses are disabled, or locked, reading the GPIOLOCK register returns 0x00000001.

该寄存器包含的位对应32个FWBn寄存器，其中FWBVAL的第[n]位对应FWBn。
Contains a bit for each of the 32 FWBn registers, where bit[n] of FWBVAL corresponds to FWBn.

运算结果经常被写进CPU内部的暫存器，以供隨后指令快速存取。
Very often the results are written to an internal CPU register for quick access by subsequent instructions.

比较器响应时间可通过CPT0MD寄存器（见SFR定义12.2）用软件设置。
The Comparator response time may be configured in software via the CPT0MD register(see SFR Defini- tion 13.2).

我记得8086是一个16位处理器，它使用双寄存器来启用32位内存寻址。
As I recall, the 8086 was a 16 bit processor, which used double registers to enable 32 bit memory addressing.

在用户模式下，r14被用作链接寄存器(lr)，用于存储调用子例程时的返回地址。
In User mode, r14 is used as a link register(lr) to store the return address when a subroutine call is made.

因此，当写入访问被禁用或锁定时，读取GPIOLOCK寄存器返回0x00000001。
Therefore, when write accesses are disabled, or locked, reading the GPIOLOCK register returns 0x00000001.

E0CNT寄存器（见USB寄存器定义21.11）保持端点0FIFO中的接收数据字节数。
The E0CNT register(USB Register Definition 23.11) holds the number of received data bytes in the Endpoint0 FIFO.

要装载保存了8个粒子的X坐标的256位YMM寄存器，需要执行9条独立指令。
To load one 256 bit ymm register with the X coordinate of 8 particles, 9 separate instructions need to be executed.

这个机器有3个寄存器--一个程序计数器p，一个基寄存器b，和一个栈顶寄存器t。
The machine had 3 registers- a program counter p, a base register b, and a top-of-stack register t.

特别需要注意的是，虽然RST输入管脚在边界扫描数据寄存器链上，但它只供观察。
It is important to note that although the RST input pin is on the Boundary Scan Data Register chain, it is only observable.

个16位CPU寄存器，每个能够执行所有算术和逻辑运算并充当内存指针。
Eight 16-bit CPU registers each capable of performing all arithmetic and logic operations as well as acting as memory pointers.

这就导致了一种可能，即我的结果可能无法重新存储到我的32位寄存器中，我可能会出错。
And this introduces the possibility that my result may not fit back into my 32-bit register and that I might get an error.

用于微电网的储能电池是能量储存器，可在需要时存储电能并供应能….
Microgrids Energy storage battery for microgrids is an energy reservoir that can store electrical energy and supply energy when required.

TH和TL寄存器以及温度计配置设定都保存在NVEEPROM中，因此它们在安装之前就可编程设置。
The TH and TL registers and thermometer configuration settings are stored in NV EEPROM so they can be programmed prior to installation.

有人猜测，“第八届”意味着低一个八度，降低或低音寄存器，在上部或女高音注册的对比。
It has been conjectured that"the eighth" means an octave lower, the lower or bass register, in contrast with the upper or soprano register.

我们不能选择两个入参寄存器中的任何一个来给结果值使用，因为这两个寄存器都还作为存放本地变量的位置出现在栈上。
We cannot use any of the input registers for the result, since both registers still appear on the stack for holding the local variables.

由于多个功能可映射至同一个引脚，STATUS寄存器可用于确定导致中断触发的具体条件。
Because multiple functions can be mapped to the same pin, the STATUS register can be used to determine which condition caused the interrupt to trigger.

异常进入和返回机制自动采用EXC_RETURN（参见表2-10在108页）的值来更新CONTROL寄存器。
The exception entry and return mechanisms automatically update the CONTROL register based on the EXC_RETURN value(see Table 2-10 on page 87).

第三条指令使用立即寻址模式和寄存器寻址模式，并采用R1，将R1添加到它，向其添加1，然后将其存储回去。
The third instruction uses immediate addressing mode and register addressing mode and takes R1, adds R1 to it, adds 1 to it, and stores it back.

新的研究结果强调了，DNA是一种令人难以置信的强大信息储存器，自然以一些意想不到的方式充分地利用了它。
These new findings highlight that DNA is an incredibly powerful information storage device, which nature has fully exploited in unexpected ways.".

由于SincetheWebAssembly代码并不指定寄存器，它给浏览器提供了更大的灵活性来分配最适合机器的寄存器。
Since the WebAssembly code doesn't specify registers, it gives the browser more flexibility to use the best register allocation for that machine.

初始卡尔曼增益或协方差系数用在IMU寄存器设置中，以建立Isensor输出矢量之间的期望相关性。
The initial Kalman gain or covariance coefficients are used within the IMU register settings to establish expected correlation between the Isensor output vectors.

加载在并行加载寄存器中的当前指令决定了哪个DR链在TAP控制器排序过程中被捕捉、移位或更新。
The current instruction loaded in the parallel load register determines which DR chain is captured, shifted, or updated during the sequencing of the TAP controller.

使能MAX44000的内部接近检测中断(寄存器0x01的第1位)，可将唤醒门限写入内部寄存器(0x0B和0x0C)。
By enabling the MAX44000's internal proximity interrupts(bit 1 in register 0x01), you can write the wakeup threshold to an internal register(0x0B and 0x0C).