折弯 英语是什么意思 - 英语翻译

• bending

在 中文 中使用 折弯 的示例及其翻译为 英语

我们在折弯这条曲线。
We're bending the curve.

我们称之为三维折弯。
We called ourselves Triple Bypass.

数隔条折弯机SBM.
CNC Aluminum Spacer Bending Machine SBM-CNC.

成形和折弯设备使用率达到53.44%;
Forming and bending equipment use rate is 53.44%;

铝间隔条折弯派克中空玻璃机官.
Spacer Bending Machine_Ji'nan Parker Machinery Co Ltd.

轧硬卷一般是用来做无需折弯，拉伸的产品。
Rolled hard rolls are generally used for products that do not require bending or stretching.

SBM_铝间隔条折弯派克中空机官.
SBM_ Spacer Bending Machine_Ji'nan Parker Machinery Co Ltd.

插针技术折弯技术连接技术检测技术装配.
Pin Technology Bend technology Connection technology Detection Technology Assembly.

折弯，切割，焊接加工性能优势，镍含量稳定的优点。
Bending, cutting, welding processing performance advantages, nickel content stability advantages.

但如果是在折弯系统中的，则是指Y轴。
But if it is a bend in the system, it refers to the y axis.

Bystronic首次参展：我们的团队在日本首次展示了折弯技术。
A premiere for Bystronic: For the first time, our team presented bending technologies in Japan.

Bystronic在ExperienceCenter向客户展示最新的折弯趋势和技术。
In an Experience Center, Bystronic presents the latest bending trends and technologies.

因此新的钣金工艺是从设计开始的：设计+激光切割+折弯+焊接/铆焊。
Therefore, the new sheet metal process begins with design: design+ laser cutting+ bending+ welding/ welding.

B、板料折弯剪切机：即在同一台机械上可完成剪切和折弯两种工艺。
Sheet bending and shearing machine: that is, two processes of cutting and bending can be completed on the same machine.

如进口亚克力比一般的亚克力较厚，双手不易折弯，终生不会变形，发黄。
Such as imported acrylic than general acrylic thick hands is not easy to bend, life can not be deformed, yellow.

在这里，您将看到有关激光切割、折弯、自动化设备、软件和智能服务的所有趋势和新内容。
See here all trends and innovations in the fields of laser cutting, bending, automation, software, and smart services.

对于复杂的折弯工件，用户可以在约1.5米长的折弯长度上布置若干个折弯位置。
When bending complex parts, users can set up several bending stations over the bending length of approximately 1.5 meters.

良好的延伸性，5052铝板的延长率为15-30%，能够保证冲压，折弯，又良好的效果。
Good elongation, the elongation of 5052 aluminum sheet is 15-30%, which can ensure stamping, bending, and good results.

目前最常用的应该属于全软系列的，因为O态比较容易拉伸，折弯。
At present, the most commonly used should belong to the full soft series, because o-states are relatively easy to stretch, Bending.

利用钣金加工激光的切缝细，精度高的特点，一次切割(带微连接)，配合四次折弯，完成四个工件。
Using the laser's fine slitting and high precision, one cut(with micro-join) and four bends to complete four work pieces.

OiwissystemtechnikGmbH为各个工业提供高精密冲压/折弯钣金零部件和保护外壳。
Iwis systemtechnik GmbH produces high-precision punched and bended parts and shielded housings for various industries.

把吉普车停在折弯的顶端，他们可以向西北望去菲律宾海的最外端。
Shaftoe parks the jeep at the apex of a switchback, where they can look northwest across the outermost reaches of the Philippine Sea.

Itonaga指出，该机器首先将传感器折弯，然后再用一层陶瓷涂层来加强其稳定性。
Itonaga specified that the machine first bends the sensor, but it's also fortified with a ceramic coating after the bending for stability.

我公司有大型折弯机及烘箱设备,可对PC板2.5米内进行冷弯和热弯成型加工。
Our company has large bending machine and oven equipment, it can perform cold bending and hot bending processing of PC plate within 2.5 meters.

以往传统的折弯方式如强制折弯、自由折弯、甚至于三点式折弯都已无法满足上述要求。
Traditional bending methods such as forced bending, free bending and even three-point bending have been unable to meet the above requirements.