栓 英语是什么意思 - 英语翻译

• bolt
• bolts
• hydrant

在 中文 中使用 栓 的示例及其翻译为 英语

布兰登螺栓.
Brandon Bolt.

不锈钢螺栓大号.
Stainless Steel I Bolt.

主螺栓,”珀西说。
The master bolt,' Percy said.

栓-浙江迪耳药业有限公司.
Syrup_Suppository- Zhejiang Deyer Pharmaceutical Co Ltd.

巴伐利亚有超过100个栓俱乐部。
There are more than 100 stopper clubs in Bavaria. clubs.

室外消火栓的保护半径不应超过150m。
Outdoor fire hydrant protection radius should not exceed 150m.

珀西必须去阴间,找到主螺栓,和揭示真相。
Percy must go to the Underworld, find the master bolt, and reveal the truth.".

一扇门螺栓的崩溃和友好的喊“早上好!
The crash of a door bolt and the friendly shout of"Good morning!

是的，我一般培训设计工程师，而非实际拧紧螺栓的人。
Yes, I typically train the design engineers, not the people actually tightening the bolt.

我向你射击热螺栓，Tania我让你的卵巢白热化。
I shoot hot bolts into you, Tania, I make your ovaries incandescent.

调整球后，可以拧紧螺栓，或者可以更换滚子轴承。
After the ball is adjusted, the bolt can be tightened, or the roller bearing can be replaced.

而Sanjay正在支持架构，加固横梁，拧紧螺栓。
Sanjay is shoring up the structure, reinforcing the beams, tightening the bolts.

因此，应定期检查和拧紧螺栓和螺母，以减少不必要的成本。
Therefore, bolts and nuts should be checked and tightened regularly to reduce unnecessary maintenance costs.

级六角头螺栓硬化以提高强度,是最常见的螺栓发现在汽车应用。
Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications.

汽车制造商说,将通过拧紧螺栓或更换整个方向盘来解决这个问题。
The carmaker said that it will fix the issue by tightening the bolts or replacing steering wheels entirely.

测量或识别短螺栓和长螺栓的外径，并分别对f3和f5使用这些值。
Measure or identify the outer diameters of the short and long bolts, and use these values for f3 and f5 respectively.

因此，应定期检查和拧紧螺栓和螺母，以减少不必要的成本。
Therefore, bolts and nuts should be inspected regularly and tightened to reduce unnecessary maintenance costs.

他们每年要支付大约6美元的水税（Jurgis默默地决定关闭消防栓）。
They would have to pay the water-tax, about six dollars a year-(Jurgis silently resolved to shut off the hydrant).

因此，应定期检查并拧紧螺栓和螺母，以减少不必要的维护成本。
Therefore, bolts and nuts should be checked and tightened regularly to reduce unnecessary maintenance costs.

含有少量的硫，具有很好的机加工性能，经常用于加工非标螺栓和螺母。
It contains small amounts of sulphur for improved machinability hence it is often used for custom-made nuts and bolts.

因此，应定期检查并拧紧螺栓和螺母，以减少不必要的维护成本。
Therefore, bolts and nuts should be inspected regularly and tightened to reduce unnecessary maintenance costs.

四个短螺栓平头机螺丝、锌、6x1/2”）以将1毫升注射器固定到3D打印定制支架上。
Four short bolts(Pan Head Machine Screw, Zinc, 6 x 1/2”) to secure the 1 mL-syringes to the 3D-printed custom holder.

完全焊接的类型可以承受比螺栓类型高的温度和压力水平，但是不能打开清洗。
The fully welded type can withstand higher temperatures and pressure levels than the bolt type, but does not open the wash.

高强螺栓最小规格M12,常用M16~M30,超大规格的螺栓性能不稳定,设计中应慎重使用。
High strength bolt minimum specification M12, commonly M16~ M30, super-size bolt performance is not stable, should be used carefully in design.

拧紧螺栓时应有足够的预紧力,其预紧力应为螺栓材料屈服极限的70%。
When tightening the bolt, there should be enough pre-tightening force, and the pre-tightening force should be 70% of the yield limit of the bolt material.

拧紧螺栓时应有足够的预紧力,其预紧力应为螺栓材料屈服极限的70%。
When tightening the bolts, there should be sufficient pre-tightening force, and the pre-tightening force should be 70% of the bolt data's compliance limit.