焊接 英语是什么意思 - 英语翻译

• weld
• solder
• welding
• soldering
• welded
• welds
• soldered

在 中文 中使用 焊接 的示例及其翻译为 英语

从印刷到焊接.
From printing to soldering.

它们应该焊接或焊接。
They should be soldered or welded.

以前，我们用人来焊接。
Before, we used people to solder.

江阴市通利焊接设备有限.
News_JIANGYIN TONGLI WELDING EQUIPMENT CO LTD.

不要加热或直接焊接电池。
(5) Do not heat or solder the battery directly.

焊接时，外加保护气体，主要是CO2。
The welding uses protective gas, mainly CO2.

其低钢级（J55，N80）可为焊接钢管。
Its low grade(J55, N80) can be welded steel pipe.

焊接安装时，阀门不应关闭。
If it is installed by welding, the valve must not be closed.

其低钢级（J55，N80）可焊接钢管。
Its low steel grade(J55, N80) can be welded steel pipe.

焊接结束时填充好弧坑以防止裂缝。
The end of welding filled with a good arc to prevent cracks.

(4)不适于焊接薄板和特殊金属。
Is not suitable for the welding of special metals and sheet.

可在室温或特殊条件下焊接。
It can be welded at room temperature or under special conditions.

热塑性塑料，如PVC和PU，特别容易焊接;
Especially easy to weld thermoplastics, such as PVC and PU;

一层焊接掩模用于保护PCB免受氧化。
A layer of solder mask is used to protect the PCB from oxidation.

与在MacBookAir中一样，RAM被焊接到主板。
As in the MacBook Air, the RAM is soldered to the logic board.

由于焊接的存在，应该进行无损检测。
Due to the presence of welds, non-destructive testing is required.

金属颗粒不是焊接产生的唯一有毒物质。
Metal particles are not the only toxic substances that can result from welding.

这主要用于单面焊接和焊后焊接。
This is mainly used for the soldering of the single-sided and post-weld.

焊接、螺栓或铆钉通常用于连接部件或部件。
Welds, bolts or rivets are usually used to connect the components or components.

我们提供各种先进的焊接材料，以协助任何应用。
We offer a wide variety of advanced solder materials to assist in any application.

焊接加工的钢材总量比其他加工方法多。
The total amount of steel processed by welding is more than other processing methods.

特殊流程的审查和建议，例如焊接和无损检查.
Review and advice of special processes such as welding and non-destructive examination.

焊接烟雾中含有焊接材料中的金属氧化物。
Welding fumes contain oxides of the metals in the materials being welded.

如果焊接不牢固，这辆车会掉到作者身上。
If the welding isn't strong enough, the car will fall on the writer.

焊接过程不能破坏壳子内任何部件。
The weld process cannot damage any of the components inside the can.

这些结构的安装连接主要以焊接为主要连接方式。
The mounting connection of these structures is mainly based on welding as the main connection.

将焊接接地电缆直接连接到要焊接的部位。
Connect the welding ground cable directly to the part that will be welded.

热处理钢板焊接修补后应再次进行热处理。
After the heat-treated steel plate is repaired by welding, heat treatment shall be performed again.

焊接后导电性好，电阻率极低或近乎零。
Good electrical conductivity after welding, the resistance coefficient is extremely low or nearly zero.

分立元器件的焊接在整个电子产品中处于核心地位。
The soldering of discrete components is at the heart of the entire electronics.