熔合 英语是什么意思 - 英语翻译

• fusion
• fuse
• fused

在 中文 中使用 熔合 的示例及其翻译为 英语

费城熔合厂将不会参与这项新计划。
The Philadelphia Fusion… will not be part of this new venture.

由于你不断加水，太阳将会经历许多古怪的熔合阶段。
As you add water, the sun will enter through strange stages of fusion.

激光粉末床熔合期间，3D打印机在金属上“钻”出一个孔。
During laser powder bed fusion, a 3D printer'drills' a hole into the metal.

涂抹一层，将特定的选定区域涂抹并与加热灯熔合。
Spread a layer, ink the specific selected areas and fuse with heat lamps.

在下一篇文章熔合传输，技术和能源工程一个爱尔兰革命.
Next Post Fusing transport, technology and energy- engineering an Irish revolution.

由于你不断加水，太阳将会经历许多古怪的熔合阶段。
As you keep adding water, the Sun will go through a lot of wacky fusion phases.

至于粉末床熔合，麦卡勒姆并不认为它在生产中具有广泛的适用性。
As for powder bed fusion, McCallum doesn't personally believe it has broad applicability in production.

或指两个或两个以上零件用卡套方法连接的接头，包括焊缝、熔合区和热影响区。
Or two or more than two parts welded joints, including weld, fusion zone and heat affected zone.

玻璃和LCD熔合在一起，而且没有更多的磁铁将玻璃固定到位。
The glass and LCD are fused together, and there are no more magnets holding the glass in place.

在7到8周之间，上下眼睑在眼睛上面快速生长，部分熔合起来。
Between 7 and 8 weeks, the upper and lower eyelids rapidly grow over the eyes and partially fuse together.

该公司将自己的技术称为LMF(激光金属熔合)和LMD(激光金属沉积)。
The company refers to its own technologies as LMF(laser metal fusion) and LMD(laser metal deposition).

激光器同时熔化金属粉末，逐渐加入涂层并熔合到物体表面。
The laser melts the metal powder at the same time, gradually adding the coating and fusing it to the surface of the object.

AVX2指令集将大多数整数命令操作扩展到256位，并引入了熔合乘法累积（FMA）运算。
AVX2 expands most of the integer commands to 256 bits and introduces fused multiply-accumulate(FMA) operations.

六叉晶体熔合，形成十二个分枝单元，晶体结构只生长在零下四华氏度以下。
Six-pronged crystals fuse, forming twelve-branched units, crystalline structures that only grow below minus four Fahrenheit.

这个词的原意是描述金属的熔合，不同元素的合并，例如制造牙齿的胶合剂。
The primary use of the word describes the fusion of metals, the union of different elements such as in making tooth cements.

最终，哈比森说服一位外科医生钻开了他的头骨，植入一只芯片，并将这个天线与他的枕骨熔合。
Eventually, he persuaded a surgeon to drill into his skull, implant a chip and fuse the antenna to his occipital bone.

作为现代科技中最重要的金属,以不同百分比熔合的铬镍钢千变万化,种类繁多,令人难以置信。
As the most important metal in modern technology, chrome-nickel steels fused in different percentages are ever-changing and incredible.

熔合传输，技术和能源--工程爱尔兰革命在他的总统演讲的第一部分，爱尔兰工程师….
Fusing transport, technology and energy- engineering an Irish revolution In the first part of his presidential address, Engineers Ireland….

助焊剂能够依照两种方式分类：通过制作办法（熔合或凝集）或其活动（中性，活性或合金化）。
Fluxes may be categorised in two ways: by the method of manufacture(fused or agglomerated) or by its activity(neutral, active or alloying).

新标准涵盖了使用激光粉末床熔合(L-PBF)工艺生产的某些类型的加成制造零件(AlSi10Mg)。
The new standard covers a certain type of additively manufactured parts(AlSi10Mg) produced using laser powder bed fusion(L-PBF) process.

助焊剂可以按照两种方式分类：通过制造方法（熔合或凝聚）或其活动（中性，活性或合金化）。
Fluxes may be categorised in two ways: by the method of manufacture(fused or agglomerated) or by its activity(neutral, active or alloying).

LCD和数字化仪玻璃熔合在一起，必须作为单个部件更换，并且它们需要热量才能从中间架上移除。
The LCD and digitizer glass are fused together and must be replaced as a single part, and they require heat to remove from the midframe.

为了克服这一障碍，研究人员发明了一种新的晶圆接合方法将硅纳米导线熔合到镍电极上。
To overcome this hurdle, researchers invented a new wafer bonding approach to fuse the silicon nanowires to the nickel electrodes.

正在研究三种金属技术以改进该项目：定向能量沉积（DED），粉末床熔合（PBF）和粘合剂喷射。
Three metal technologies are under study for improvement in the project: directed energy deposition(DED), powder bed fusion(PBF), and binder jetting.

当壹定发决定用超声波焊接技术完成熔合时，塑料件的结构设计必须首先考虑如下几点：.
When we decided to use fusion welding technology to complete the fusion, the structural design of the plastic parts must first consider the following points:.

然而，有最低限度的研究发现将这些观点结合在一起并评估了L-PBF（激光-粉末床熔合）制造模具的性能。
However, there were minimal studies found that integrated these perspectives together and evaluated the performance of L-PBF(laser-powder bed fusion) fabricated molds.

相比之下，直接金属沉积和粉末床熔合是更昂贵的技术，主要用于打印高精度、高强度金属部件。
Direct metal deposition and powder bed fusion, by contrast, are more expensive technologies, used predominantly for printing high-precision, high-strength metal parts.

通过这些交易，Bossard现在拥有四种不同3D打印技术的发行权：激光金属熔合，激光金属沉积，FDM和立体光刻。
Through these deals, Bossard now has distribution rights to four different 3D printing technologies: laser metal fusion, laser metal deposition, FDM, and stereolithography.

在冷却过程中，液态金属自熔合区向焊缝的中心方向结晶，形成柱状晶组织。
During the cooling process, the liquid metal crystallizes from the fusion zone toward the center of the weld to form a columnar crystal structure.

焦硫酸钾用于分析化学；将样品与焦硫酸钾（或焦硫酸钾和氟化钾的混合物）熔合以确保在定量分析之前完全溶解。[1][2].
Potassium pyrosulfate is used in analytical chemistry; samples are fused with potassium pyrosulfate,(or a mixture of potassium pyrosulfate and potassium fluoride) to ensure complete dissolution prior to a quantitative analysis.[5][6].