表面缺陷 英语是什么意思 - 英语翻译

• surface defects

在 中文 中使用 表面缺陷 的示例及其翻译为 英语

还可以用于减少玻璃纤维增强复合材料的表面缺陷。
It can also be used to reduce surface defects for glass fiber reinforced composites.

但从原理中可以明显看出，它只能检测出表面缺陷。
The only drawback is that it can only detect surface defects.

对象必须是导电材料，只适用于检测金属表面缺陷。
The object must be conductive material, only for detecting metal surface defects.

无损检查目视检测范围：1、焊缝表面缺陷检查。
Visual inspection of non-destructive testing: 1, weld surface defects testing.

这是由于在凹槽表面缺陷和其他错误造成的。
This is due to surface imperfections and other errors in the groove period.

表面缺陷检测仪.
Detection of surface defects.

因为大多数污染物和表面缺陷的尺寸比较小，在检查镜片时我们经常需要用到放….
Because most contaminants and surface defects are smaller in size, we often need to use amplification devices when inspecting optical components.

因为大多数污染物和表面缺陷的尺寸比较小，在检查镜片时我们经常需要用到放….
Because most contaminants and surface defects are relatively small in size, we often need magnifying equipment when inspecting lenses.

因为大多数污染物和表面缺陷的尺寸比较小，在检查镜片时我们经常需要用到放大设备。
Because most contaminants and surface defects are smaller in size, Optical Components we often need to use amplification devices when inspecting optical components.

如果处理水的过程不得当，水中的矿物质会导致工件表面缺陷以及不连续性。
If the process of treating water is not a matter of course, the minerals in the water can cause casting surface defects and discontinuities.

生成的3D图像的真实性使得技术人员可以很轻易地观察所有的表面缺陷，例如腐蚀特征等。
The realism of the 3D image generated makes for easy visualization of any surface defects, such as corrosion features.

如果处理水的过程不得当，水中的矿物质会导致铸件表面缺陷以及不连续性。
If the process of treating water is not appropriate, minerals in the water can cause surface defects and discontinuities in the casting.

奥氏体不锈钢的锻造要比普通钢难，但很少产生表面缺陷。
The forging of austenitic stainless steel is more difficult than that of ordinary steel, but surface defects rarely occur.

工业内窥镜还存在诸如效率不足和表面缺陷的确定标准不一致的问题。
Industrial endoscopes also have problems such as insufficient efficiency and inconsistent determination criteria for surface defects.

五）表面质量检验表面质量检验主要是对材料、外观、形状、表面缺陷的检验，主要有：.
Surface quality inspection is mainly on the material, appearance, shape, surface defects of the test, are:.

专门设计或制造用于检验燃料芯块的最终尺寸和表面缺陷的全自动芯块检查台；.
(1) Fully automatic pellet inspection stations especially designed or prepared for checking final dimensions and surface defects of fuel pellets;

对于10x10米的单层木屋的建造，将需要约350块没有表面缺陷的坚固木材。
For the construction of a single-storey log house of 10x10 m, about 350 strong pieces of wood without surface defects will be required.

因此，及时预防和处理304不锈钢管表面缺陷显得尤为重要。
Therefore, it is very important to prevent and treat the surface defects of 304 stainless steel capillaries in time.

奥氏体不锈钢的锻造要比普通钢难，但很少产生表面缺陷。
Forging of austenitic stainless steel is more difficult than those of ordinary steels, but it rarely produces surface defects.

这种3D检测过程又称作激光三角测量，如今都可以在生产过程中避免表面缺陷。
This technological 3D inspection process, called laser triangulation, now makes it possible to avoid surface defects already during production.

表面粗糙度无缺陷非常重要，因为表面缺陷可能成为裂纹的发源地。
A flaw-free surface finish is extremely important because a surface defect can be a crack-initiation site.

各种表面缺陷是否允许存在，或者允许存在程度，在有关标准中均有明确规定。
Whether the surface defects are allowed to exist, or allow the existence of the relevant standards are clearly defined.

因此，及时预防和处理304不锈钢管表面缺陷显得尤为重要。
Therefore, it is very important to do a good job of preventing and dealing with the surface defects of 304 stainless steel tubes in time.

为了防止回流不良或冷却不均匀的外观导致塑性成形不良，导致表面缺陷和劣化;
In order to prevent the appearance of poor back flow, or uneven cooling resulting in poor plastic forming, resulting in surface defects and deterioration;

实验前，应确保所有试样的尺寸都符合标准要求，且无可见的表面缺陷。
Prior to testing, you should make sure all specimens are made to the sizes specified in the standard and are free of visible surface flaws.

此外，由于其分层的性质和原始的界面，二维半导体表现出相当高的流动性和对表面缺陷的免疫力，根据论文。
Moreover, due to their layered nature and pristine interfaces, the 2D semiconductors exhibit reasonably high mobilities and immunity against surface defects, according to the paper.

从缺陷部位来说，可以是表面缺陷，也可以是内部缺陷。
From the point of view of the defect, it can be either surface defects or internal defects..

虽然有清洗、磷化的帮助，但他们还无法克服由轧机形成的表面缺陷。
Cleaning and phosphating help, but they cannot overcome surface defects formed at the mill.