Examples of using
在实际生产
in Chinese and their translations into English
{-}
Political
Ecclesiastic
Programming
在实际生产中也是能达到95%,甚至更高;.
In actual production, it can reach 95% or even higher.
这在实际生产过程中经常被忽视,应该.
This is often overlooked in the actual production process and should be given enough attention.
这在实际生产过程中经常被忽视,应该给.
This is often overlooked in the actual production process and should be given enough attention.
在实际生产过程中,并非所有塑料材料都可以焊接。
In the actual production process, not all plastic materials can be welded.
在实际生产中,对于高速大规模生产,引线框架通常以特定布置连续地冲压在金属带上。
In actual production, for high-speed mass production, lead frames are usually continuously stamped on a metal strip in a specific arrangement.
如果您出色的解决方案没有在实际生产环境中得到证明,那么您就是在销售pixiedust。
Without your awesome solution having proven itself in a real production environment you are selling pixie dust.
在实际生产中,为了补偿这种缺陷,经常使用增加印刷压力的方法。
In actual production, in order to compensate for this defect, a method of increasing the printing pressure is often used.
在实际生产环境里边,如果并发量不大且不允许脏读,可以使用悲观锁解决并发问题;.
In a real production environment, pessimistic locking can be used to solve concurrency problems if the concurrency is small and dirty reads are not allowed;
而在实际生产中,并不方便即时根据猪只身高调整饮水器的高度。
In actual production, it is not convenient to immediately adjust the height of the drinking fountain according to the height of the pig.
因此,PTC电热元件在实际生产生活中的应用只能局限在低温加热领域.
Therefore, PTC heating elements in actual production application only limited in the field of low temperature heating.
所以在实际生产环境中,一个Topic会设置成多分区的模式,来支持多个消费者,参照下图:.
In actual production environments, a topic will be setin the multi-partition mode to support multiple consumers, as shown in the figure below:.
在实际生产中,常常是多种工序综合应用于一个工件。
In actual production, many kinds of processes are usually applied to a workpiece.
在实际生产中,应当根据纸张的不同来调节压力。
In actual production, the pressure should be adjusted according to the difference in the paper.
但在实际生产中,大量填充橡胶填料会降低胶料耐热性,这点需要特别注意;.
However, in actual production, a large amount of rubber filler will reduce the heat resistance of the rubber compound, which requires special attention;
我们在实际生产中使用的方法是特殊湿法脱胶,是水化脱胶方法的一种。
The method we use in actual production is special wet degumming, which is one of the hydration degumming methods.
但是在实际生产中,成型时间(或注塑速度)要受到很多条件的制约。
But in actual production, molding time(or injection speed) is subject to many conditions.
在实际生产中还根据情况适当提高20℃左右。
In actual production, it is also appropriate to raise about 20 degrees according to the situation.
这些冲压先进技术在实际生产中已经取得良好的技术经济效果。
These stamping advanced technologies have achieved good technical andeconomic effects in actual production.
在实际生产中,为了实现高速、大批量生产,引线架通常在金属带材上按一定的布置进行连续压制。
In actual production, for high-speed mass production, lead frames are usually continuously stamped on a metal strip in a specific arrangement.
如若模具设计合理,则在实际生产中遇到的问题少,铸件下机合格率高。
If the mold design is reasonable,there are fewer problems encountered in actual production, and the pass rate of the castings is high.
但在实际生产中,仍会出现大量毛刺和批次。
However, in actual production, there will still be a large number of burrs and fronts.
由于它的腐蚀速率较低,一般在实际生产中不多见,但有望用在无氯蚀刻中。
Due to its low corrosion rate,it is not commonly seen in actual production, but it is expected to be used in chlorine-free etching.
目前,我国除少量钢种外,钢铁企业在实际生产中几乎放弃了稀土的应用。
At present, except for a small amount of steel, the iron andsteel enterprises almost abandoned the application of rare earth in actual production.
在实际生产过程中,我们通常从以下五个方面的色差的控制。
In the actual production process, we generally control the color difference from the following five aspects.
这在实际生产过程中经常被忽视,应该给予足够的重视。
This is often overlooked in the actual production process and should be given enough attention.
在实际生产过程中,只有分子结构相同或相近的热塑性塑料才能进行焊接。
In the actual production process, only the molecular structure of the same or similar to the thermoplastic plastic can be welded.
在实际生产中,常常是多种工序综合应用于一个工件。
In the actual production, often a variety of processes integrated application to a workpiece.
在实际生产之前建造实物大模型以测试新型舰船,是现代海军造船的惯例。
Building a large-scale mockup to test a new ship before actual production begins is common practice for modern naval ship-building.
中文
Bahasa indonesia
日本語
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt