What is the translation of " 外部时钟 " in English?

• external clock

Examples of using 外部时钟 in Chinese and their translations into English

了外部时钟.
The External Clock.

如果选择外部时钟，则XTAL2设置成DDA。
If the External Clock is selected, XTAL2 is configured as DDA.

异步串口是指在没有外部时钟信号的情况下传输数据。
Asynchronous means that data is transferred without support from an external clock signal.

外部时钟/8（未暂停时与SYSCLK同步）。
External clock divided by 8(synchronized with SYSCLK when not in suspend).

外部时钟除以8（与系统时钟同步）.
External clock divided by 8(synchronized with the system clock)..

外部时钟/8（与系统时钟同步）.
External clock divided by 8(synchronized with the system clock)..

我们为避开外部时钟信号而采用的这些机制是-.
These mechanisms, which we get for eschewing the external clock signal, are-.

了外部时钟，XTAL2就被配置成DDA。
If the External Clock is selected, XTAL2 is configured as DDA.

用户也可以采用外部时钟。
An external clock can also be used.

时钟源：内部128kHz低频RC振荡器或外部时钟。
Clock source: internal 128 kHz internal low frequency RC oscillator or external clock.

内部和外部时钟，时钟乘法器。
Internal and external clocks, clock multiplier.

内部和外部时钟，时钟倍频.
Internal and external clocks, clock multiplier.

外部时钟必须被设置为.
The external clock should be.

内部时钟方式和外部时钟方式。
The internal clock and the external clock.

处理器的执行由外部时钟控制。
The processor's execution is governed by an external clock.

处理器的执行由外部时钟来监控。
The processor's execution is governed by an external clock.

异步串口是指在没有外部时钟信号的情况下传输数据。
Asynchronous means the transmission of data without the use of an external clock signal.

外部时钟模式分割是理想的实时时钟（RTC）的功能，其中所述.
The external clock mode is ideal for real-time clock(RTC) functionality, where the.

外部时钟可以被停止在任何时间，在任何状态下，而不会影响处理器。
The external clock can be stopped at any time and in any state without affecting the processor.

该外部时钟可以是专用的主时钟，或是具有相应输出的其他设备。
This external clock can be a dedicated master clock, or any other piece of gear with a corresponding output.

外部时钟可在任何时间任何状态下停止，而对处理器没有任何影响。
The external clock can be stopped at any time and in any state without affecting the processor.

定时器2时钟为外部时钟/8（与系统时钟同步）。
Timer 2 clock is the external clock divided by 8(synchronized with SYSCLK).

要使用外部时钟源驱动器件时，XTAL2可以不连接而由XTAL1驱动。
To drive the device from an external clock source, XTAL2 should be lef t unconnected while XTAL1 is driven.

TCC时钟源可以是内部时钟或者外部时钟（由TCC引.
The clock source of TCC can be internal or external clock input(edge selectable from TCC pin).

必须选择内部RC振荡器或外部时钟源来提供系统时钟。
Internal RC Oscillator or the External Clock source to provide the system clock..

用户必须选择内部RC震荡器或者外部时钟源来提供系统时钟。
Internal RC Oscillator or the External Clock source to provide the system clock..

外部时钟设备的质量参差不齐，所以承诺在购买之前，应该先测试是否与NADAC能一起工作。
The quality of external clocking devices varies, so before committing to a purchase, it should be tried with the MERGING+NADAC first.

S包含独立的内部DC/DC稳压器和内部晶振，因此无需外部时钟元件。
The'130S includes its own internal DC/DC regulator and internal crystal so it needs no external clocking components.

所有器件在“最小值”条件下均经过测试，此时在OSC1引脚上施加外部时钟。
All devices are tested to operate at“min” values with an external clock applied to the OSC1 pin.

所有器件在测试“最小值”时，都在OSC1/CLKI引脚连接了外部时钟。
All devices are tested to operate at"min." values with an external clock applied to the OSC1/CLKIN pin.