What is the translation of " 密封件 " in English?

• seal
• seals

Examples of using 密封件 in Chinese and their translations into English

另为，橡胶密封件和尼龙密封件不能互相代替。
In addition, rubber seals and nylon seals cannot be substituted for each other.

任何橡胶密封件也不能损坏。
Also can not damage any rubber seal.

密封件使液体或气体不会泄漏到环境中。
The seal keeps the liquid or gas from escaping to the environment.

密封件安装，重型工业应用.
Seal installation, heavy industrial applications.

同样也不能损坏任何橡胶密封件。
Also can not damage any rubber seal.

这样的设备也将始终具有橡胶密封件。
Such devices will always have a rubber seal too.

质量是我们用来制造密封件的塑料类型。
Quality is the type of plastic we use to manufacture the seals.

该联盟指出，这些材料被美国医疗设备、厨具、密封件、电池、半导体加工设备和其他产品的生产商使用。
The group noted that the materials are used by U.S. producers of medical devices, cookware, seals, batteries, semiconductor processing equipment, and other products.

由于玻璃是无机材料，玻璃密封件保持永久密封性，因为它们不会随时间老化或磨损。
As glass is an inorganic material, glass seals maintain permanent leak-tightness as they do not age or wear out over time.

密封件和限制器板还可以作为单独的一体化部件生产。
The seal and limiter plate may also be produced as a single integrated part.

打开包装时，不要损坏密封件，防止灰尘进入它的内部。
Open the packaging, do not damage the seal, to prevent dust into its internal.

低档产品多采用铜质、橡胶等密封件，使用寿命较短，但价格低廉。
Low-grade products use copper, rubber and other seals, and have a short service life, but at a low price.

低的接触压力甚至能使密封件在一些低速应用中干运行，造成微小的摩擦扭矩和热量积聚。
The light contact pressure even enables the seal to run dry in some low-speed applications resulting in insignificant torque drag or heat build-up.

橡胶密封件，其是否能够妥善保管，是会影响到它的使用寿命的，而且，这也是不容怀疑的。
Rubber seals, whether it can be properly kept, it will affect its life, and this is also no doubt.

密封件是机器的重要组成部分，并在设备的操作中起着重要的作用。
The seal is an important part of the machine and plays an important role in the operation of the apparatus.

其结果是发生滑动，并且各个部件之间的摩擦导致密封件和滚道上的磨损，非常终导致过早失效。
The result is that sliding occurs and the friction between individual components causes wear on the seals and raceways, eventually leading to premature failure.

因此，密封件和密封装置是液压设备的一个重要组成部分。
Therefore, the seal and sealing device are an important part of the hydraulic equipment.

弹簧和密封件之间产生的张力使散热器能够保持适当的压力。
The tension generated between the spring and the seal enables the radiator to keep the proper pressure.

例如，丁腈橡胶密封件可以破解当暴露于臭氧浓度非常低的气体，除非保护。
For example, NBR seals can crack when exposed to ozone gas at very low concentrations, unless protected.

橡胶密封件，其是否能够妥善保管，是否会影响到它的使用寿命？?
Does the rubber seal, if it is properly kept, will it affect its service life?

应测试连接管，喷嘴，密封件和整个机器的气密性，并且不得有气泡，滴落，滴落或泄漏。
Nozzles, seals and the whole machine should be tested for airtightness, and there should be no bubble, dripping, dripping or leakage.

密封件的残余部分应放入一个标有“腐蚀材料”的密封塑料容器。
The remainder of the seal should be placed in a sealed plastic container labeled"Corrosive Material".

橡胶密封件是一类在密封技术中广泛使用的橡胶产品。
Rubber seals are a type of rubber products widely used in sealing technology.

弹簧和密封件之间产生的张力使散热器能够保持适当的压力。
The tension that is formed between the spring and the seal helps the radiator to maintain the needed pressure.

最终在1887年，橡胶密封件被首次用于蒸汽机活塞杆中。
Finally in 1887, rubber seals were used for the first time in steam engine piston rods.

如果你不更换粘合剂密封件，你的手机将“正常运行”，但是“它将失去防水功能”。
If you do not replace the adhesive seals, your phone will function normally, but will lose its water protection.

近几年来，随着经济的高速增长，橡塑密封件制造业一直保持两位数的增长。
In recent years, with the rapid economic growth, rubber seal manufacturing industry has maintained a double-digit growth.

动臂油缸规格为70/40非标准系列，密封件亦为非标准件，制造成本高且密封件更换不便。
Boom cylinder specifications for the 70/40 non-standard series, seals are non-standard parts, high manufacturing costs and the replacement of inconvenience seals.

在电视上经常看到原油泄漏的新闻，其实那就是密封件没做好，或者密封件的质量不行。
The oil leaked the news often seen on television, in fact, that is the seal is not good, perhaps can not seal quality.

包装：橡胶密封件不得接触溶剂、油脂、磁性材料等会损坏橡胶的材料。
Packing: rubber seals must not touch materials such as solvents, grease and magnetic materials, which will damage rubber.