In the electrical automatic control circuit,it is used to manually send out control signals to control contactors, relays, electromagnetic starters, and the like.
在电气自动控制电路中,用于手动发出控制信号以控制接触器、继电器、电磁起动器等。
In the electrical automatic control circuit,it is used for manually issuing control signal to control contactor, relay, electromagnetic starter, etc.
在电气自动控制电路中,用于手动发出控制信号以控制接触器、继电器、电磁起动器等。
In the electrical automatic control circuit,it is used to manually send out control signals to control contactors, relays, electromagnetic starters, and the like.
接口信号线按功能一般可分为数据信号线、控制信号线、定时信号线和接地线等四类。
Interface signal line according to the functionscan be divided into data signals,control signal lines, timing signal line and ground lines, and four categories.
NSI5000芯片拥有控制所需的所有逻辑,与激光系统同步,提供控制信号、捕获反射光束并计算距离。
The NSI5000 chip holds all required logic for control, and synchronizes with a laser system,providing control signals, capturing reflected beam and calculating distance.
它还负责通过标准串行、SPI或SDIO接口与主机系统交换数据和控制信号。
It is also responsible for exchanging data and control signals with the host system via standard Serial, SPI or SDIO interfaces.
在自动控制电路中,用于手动发送控制信号给控制接触器,继电器,电磁启动器等。
In the electrical automatic control circuit,it is used for manually issuing control signal to control contactor, relay, electromagnetic starter, etc.
This wallpaper has silver crystal, which blocks WiFi signals but does not block your phone orother remote control signals.
通过在千兆赫的速度上改变控制信号,射频信号的时间延迟可在相同速度进行放大和切换。
By optically varying the control signal at gigahertz speeds, the time delay of the RF signal can be amplified and switched at the same speed.
硬件接口可以允许处理器向外部计算设备和/或装置发送控制信号或指令。
The hardware interface may allow the processor to transmit control signals or instructions to an external computing device and/ or apparatus.
需要的其他选项,自动控制方式、外部控制信号类型,如模拟量控制、脉冲量控制、流量监视和定时器。
Other options of demand, automatic control methods, external control signal types, such as analog control, pulse volume control, flow monitoring and timers.
在有控制信号时,伺服电机就转动,且转速大小正比于控制电压的大小。
When there is a control signal, the servo motor rotates, and the speed is proportional to the magnitude of the control voltage.
CPU执行算术运算,管理数据流,并根据程序员创建的指令序列生成控制信号。
The CPU performs arithmetic operations, manages data flow,and generates control signals in accordance with the sequence of instructions created by the programmer.
A-4314/S-2123 w/Statement(Wisniewski, Stack, Vas/ Coniglio)-Establishes pilot program for traffic control signal monitoring system.
人工智能系统从车辆的雷达、照相机、GPS和云服务中收集数据,然后产生控制信号来操纵车辆。
The AI system collects data from cameras, GPS, vehicles radar,and cloud services to produce control signals which operate the vehicle.
在这些研究中,小分子被系统化并用来认识和控制信号传导通路。
In these studies,small molecules have been synthesized and used to understand and control signal transduction pathways.
这些功能可有效防御黑客攻击,以保护有价值的数据或防止恶意控制信号入侵终端设备。
These functions ensure that hacker exploits are thwarted to protect valuable data orprevent malicious control signals from being inserted into the end device.
另一方面,监控联网是我们对跨越空间图像传送和控制信号传送的不懈追求。
On the other hand,monitoring network is our unremitting pursuit of image transmission across space and control signal transmission.
据称,量子技术将更容易创建安全系统,以收集基础设施状态和传输系统控制信号的数据。
Quantum technology will reportedly make it easier to create secure systems to collect data on the state of infrastructure andtransmission systems for control signals.
传统CCD中的每个像素由一个二极管、控制信号路径和电量传输路径组成。
Each pixel in the traditional CCD consists of a diode, a control signal path, and a power transmission path.
人工智能系统从车辆的雷达、照相机、GPS和云服务中收集数据,然后产生控制信号来操纵车辆。
The AI system collects data from the vehicle's radar, cameras,and GPS and cloud services and generates control signals that govern the vehicle.
之前您了解到,UART设备有两个接线设置,那些设备有附加的控制信号,没有的设备。
Earlier you learned that there are two wiring settings for UART devices,those with additional control signals, and those without.
然后,计算机向发动机,襟翼,方向舵等不同部件提供控制信号,以帮助顺利飞行。
The computer then provides a control signal to different parts like engines, flaps, rudders etc. that help in a smooth flight.
在信号的处理阶段,主要是对数字信号进行处理以便显示,或者发出控制信号。
In the processing phase of the signal,the digital signal is processed in order to display or signal the control signal.
中文
Bahasa indonesia
日本語
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt