What is the translation of " 数据帧 " in English?

• data frame
• data frames

Examples of using 数据帧 in Chinese and their translations into English

面向比特的协议可以传输数据帧而不管帧的内容如何。
Bit oriented protocol can transfer data frames regardless of frame contents.

此DHCP序列验证SUT是否接收数据帧并检查响应。
This DHCP sequence verifies that the SUT receives data frames and checks for responses.

创建数据帧最简单的方法应当是使用read.
The simplest way to construct a data frame from scratch is to use the read.

数据帧.
The Data Frame.

数据帧总长度是8byte+数据长度。
The total size of a data frame is 8 bytes+ length.

数据帧和远程帧之间有两个区别。
There are two differences between a Data Frame and a Remote Frame..

我们称这些组合为“数据帧”。
We call these“data blocks.”.

控制位(Controlbit)：数据帧的值总是0.
Control bit: For data frames this value is always 0.

使用iSCSI时，SCSI命令和数据帧封装在IP中，以支持通过IP网络进行I/O磁盘访问。
With iSCSI, SCSI commands and data frames are encapsulated in IP to support I/O disk access over an IP network.

但是发送加密数据帧会自动测试正确的密钥，因为两端的加密和解密需要知道密钥。
But sending encrypted data frames automatically tests correct keys, since encryption and decryption on both ends requires knowing the key.

该消息还包括每个数据帧之间的启动和停止条件，读/写位和ACK/NACK位：.
The message also includes start and stop conditions, read/write bits, and ACK/NACK bits between each data frame:.

无线客户端发送RTS帧作为在发送数据帧之前所需双向握手的第一步。
A station sends an RTS frame as the first step in a three-way handshake that is required before sending data frames.

最后，我们卸载数据帧，并且确认它们已被从搜索路径上删除。
Finally, we detach the data frame and confirm it has been removed from the search path.

无线客户端发送RTS帧作为在发送数据帧之前所需双向握手的第一步。
A station sends a RTS frame as the first step in a two-way handshake required before sending data frames.

在传输了每个数据帧之后，接收设备将另一个ACK位返回给发送方以确认成功接收到该帧：.
After each data frame has been transferred, the receiving device returns another ACK bit to the sender to acknowledge successful receipt of the frame:..

数据帧的长度为256比特，包括32比特帧头、校验和及其它开销。
Data frames are 256 bits long, including 32 bits of header, checksum, and other overhead.

数据帧包括起始位，5-9个数据位，可能是奇偶校验位和一个或两个结束位。
A data frame includes a start bit, 5-9 data bits, possibly a parity bit and one or two end bits.

数据帧（如非控制帧）由操作码标识，操作码的最高位是0。
Data frames(e.g., non-control frames) are identified by opcodes where the most significant bit of the opcode is 0.

数据帧始终为8位长，并以最高有效位先发送。
The data frame is always 8 bits long, and sent with the most significant bit first.

如果数据在两个方向上（全双工）相互传输，数据帧本身就会传送所需的信息从而确保数据完整性。
If data is flowing in both directions(full duplex), the data frames themselves carry all the information required to ensure data integrity.

HTTP/2可以从其数据中分割标头，从而生成标头帧和数据帧。
HTTP/2 can split headers from their data, resulting in a header frame and a data frame.

它允许攻击者嗅探数据帧在一个局域网（LAN），修改交通，或停止的交通完全。
This may allow an attacker to intercept data frames on a LAN, modify the traffic, or stop the traffic altogether.

R编程支持五种类型的数据结构，即向量，矩阵，列表，数据帧和因子。
R programming supports five types of data structures namely vector, matrix, list, data frame and factor.

如果不使用奇偶校验位，则数据帧可以是9位长。
If no parity bit is used, the data frame can be 9 bits long.

它允许攻击者嗅探数据帧在一个局域网（LAN），修改交通，或停止的交通完全。
ARP Spoofing may allow an attacker to sniff data frames on a local area network(LAN), modify the traffic, or stop the traffic altogether.

服务端必须在发送任何数据帧之前发送一个包含scheme/host/port的头。
The server must send a HEADERS frame including the scheme/host/port headers before sending any data frames on the stream.¶.

如果不使用奇偶校验位，则数据帧可以是9位长。
If no parity bit is used, the data frame is 9 bits long.

第一个比特是一个控制位定义一个帧是控制帧还是数据帧。
Lt;t>The first bit is a control bit indicating whether a frame is a control frame or data frame.

交换机从数据帧中学习源MAC地址和目标MAC地址，并将其保留在表中。
The switch learns the source and destination MAC addresses from the data frames and keeps them in the table.

在下一个CLK上升沿，4位到16位数据帧的MSB输出到DX管脚。
On the next rising edge of SSIClk, the MSB of the 4 to 16-bit data frame is shifted out on the SSITx pin.