What is the translation of " 模拟信号 " in English?

• analog signal
• analogue signals
• analog signals
• analog signaling

Examples of using 模拟信号 in Chinese and their translations into English

VGA是模拟信号，HDMI是数字信号。
Because VGA is an analog signal and HDMI is a digital signal..

模拟信号：连续变化的信号。
Analogue signals: A signal that changes continuously.

模拟信号:就是连续变化的信号。
Analogue signals: A signal that changes continuously.

这是因为麦克风等输入设备会产生模拟信号。
This is because input devices, such as a microphone, produce an analogue signal.

模拟信号数字化的目标是无损编码。
The objective of digitization of the analog signal is lossless encoding.

模拟信号是连续的波形，会随时间平滑变化。
An analog signal is a continuous waveform that changes smoothly over time.

只要收到模拟信号，就容易得到通信内容。
As long as the analog signal is received, it is easy to get the communication content.

将测量值作为模拟信号输出到其它设备.
Outputting measurement values as analog signals to other devices.

建议模拟信号源的最大阻抗为10kΩ。
The maximum recommended impedance for analog sources is 10 k.

为了更精确地恢复模拟信号，必须提高分辨率。
To more accurately replicate the analog signal, the resolution must be increased.

复用和解压缩技术：模拟信号数字化后。
(1) Multiplexing and decompression techniques: After the analog signals are digitized.

该波可以被麦克风捕获并转换为模拟信号。
This wave can capture by a microphone and converted into an analog signal.

VGA/SVGA是一种模拟信号。
VGA/SVGA is an analog signal.

设计人员可以选择数字或模拟信号处理方法。
The designer can choose either a digital or an analog signal processing approach.

很多嵌入式的微控制器（microcontroller）应用都需要产生模拟信号。
Many embedded-microcontroller applications require generation of analog signals.

也就是说，HDMI的出现取代模拟信号视频，而DisplayPort的出现则取代的是DVI和VGA接口。
In other words, the emergence of HDMI replaced the analog signal video, and the emergence of DisplayPort replaced the DVI and VGA interfaces.

如果流量和累计流量及模拟信号板已占用，编程和操作可直接通过计算机完成。
If the flow and accumulated flow and analog signal board are occupied, programming and operation can be done directly from the computer.

离散和模拟信号或总线接口（标准Profinet）用于连接更高级别的控制器。
Discreet and analogue signals or bus interfaces(Profinet standard) serve to connect to a higher level controller.

对于高速模拟信号，根据其连接长度和通信的最高频率，传输线技术是必需的。
For high-speed analog signals, transmission line technology is required according to connection length and the highest communication frequency.

模拟信号是已经经过处理的信号,因此输出后音质会有一定的损失;
The analog signal is the already processed signal, so the sound quality will have a certain loss after the output;

数字信号更为灵活，可置入更小的空间，带来比模拟信号更多的机遇。
Digital signals are much more flexible, can be squeezed into smaller spaces, and open up many more opportunities than analogue signals.

VGA利用模拟信号，这意味着它只能在屏幕上显示较低的分辨率和较低的质量。
VGA utilizes analog signals, which means it is only capable of lower resolutions and lower quality display on screens.

模拟信号变为数字信号的三个步骤是：取样、量化、编码。
There are three steps for transforming the analog signal to digital signal, there are: sampling, quantization and coding.

但神经元也会采用模拟信号，即用连续值代表信息。
However, neurons also utilize analog signaling, which uses continuous values to represent information.

数字信号比模拟信号更有效地使用无线频谱，这就是为什么政府首先要求转换。
Digital signals use wireless spectrum much more efficiently than analog signals, which is why the government mandated the switch in the first place.

数字信号只能是+5V或者0V，然而模拟信号可以是0V到+5V之间的任何线性电压。
A digital signal is either +5v or 0v but an analog signal can be any linear voltage between 0v and +5v.

这些传感器都会生成模拟信号，为了获得最多且最有用的信息，我们需要进行高速、高分辨率测量。
These sensors all produce analog signals, and to gain the most insight, high-speed, high-resolution measurements must be taken.

然而，神经元也利用模拟信号，它使用连续数值表示信息。
However, neurons also utilize analog signaling, which uses continuous values to represent information.

MA至20mA模拟信号不会受到HART信号影响，可用于实施控制。
The 4- 20 mA analog signal is not affected by the HART signal and can be used in the normal way.