What is the translation of " 模拟电路 " in English?

• analog circuits
• analog circuitry
• analog circuit

Examples of using 模拟电路 in Chinese and their translations into English

模拟电路比数字电路有更大的电流。
Analog circuits have larger currents than digital.

模拟电路.
Analog Circuit.

模拟电路应与数字电路隔开。
The analog circuit should be separated from the digital circuit..

模拟电路的理论和实验室实践，EE45;
The theory and laboratory practice of analog circuits, EE 45;

高频数字信号走线应尽可能远离模拟电路和控制电路。
Frequency digital signal traces should be as far as possible from analog circuits and control circuits..

电容器可被应用在模拟电路中做为积分器（integrators）或更复杂滤波器的组件，也用在负反馈环路稳定性中。
Capacitors can be used in analog circuits as components of integrators or more complex filters and in negative feedback loop stabilization.

这些机器并未使用计算机，数字电路和符号推理；控制它们的是纯粹的模拟电路。
These machines did not use computers, digital electronics or symbolic reasoning; they were controlled entirely by analog circuitry.

模拟电路还可能对噪声很敏感，任何扰动或噪声都肯定会改变电流值的大小。
Analog circuits may also be sensitive to noise, and any disturbance or noise will definitely change the magnitude of the current.

噪声会对敏感的高性能数字处理器产生不利影响，因为它会干扰模拟电路。
Noise can adversely affect sensitive high-performance digital processors as much as it can interfere with analog circuitry.

在数字伺服系统的情况下，模拟电路被替换为执行相同功能的微处理器。
In the case of digital servos, the analog circuit is replaced with a microprocessor which performs the same function.

模拟电路通常更容易受到噪声的干扰（电压中的小的不希望的变化）。
Analog circuits are usually much more susceptible to noise(small, undesired variations in voltage).

模拟和数字音乐信号，仪器和合成器，模拟电路和数字处理。
Analog and digital music signals, instruments and synthesizers, analog circuits and digital processing.

为什么模拟电路在节省板上空间方面起着至关重要的作用.
And why the analog circuit plays an important role in saving board space.

但是，这种解决方案存在现实障碍：难以实现为接收器和发射器信号路径设计宽带模拟电路。
But there is a real-world impediment to this solution: it is difficult to design wideband analog circuitry for the receiver and transmitter signal paths.

这就要求模拟电路能够适应这种变化，无失真地处理传感器信号。
This requires that the analog circuit can adapt to these changes, without distortion sensor signal processing.

年，增长速度最快的将会是传感器，其次是光电元件和模拟电路。
In 2019, the fastest growth will be in sensors, followed by optoelectronic elements and analog circuits.

另外，MAX9791还集成一个3.3V或4.75V输出可调的LDO，可为音频编解码器或其它模拟电路提供干净的电源。
Additionally, the MAX9791 integrates a 3.3V or 4.75V adjustable-output LDO to provide a clean supply for an audio codec or other analog circuitry.

现在有许多PCB板不再是单一功能电路(数字或模拟电路)，而是由数字电路和模拟电路混合构成的。
Many PCBs are no longer single-function circuits(digital or analog circuits), but rather a mixture of digital and analog circuits.

如上所述，RF信号在发送时会对其他敏感模拟电路模块如ADC造成干扰。
As mentioned above, the RF signal will cause interference to other sensitive analog circuit modules such as ADC.

但该解决方案有一个现实的阻碍：很难为接收器和发送器信号路径设计宽带模拟电路。
But there is a real-world impediment to this solution: it is difficult to design wideband analog circuitry for the receiver and transmitter signal paths.

现在有许多PCB板不再是单一功能电路(数字或模拟电路)，而是由数字电路和模拟电路混合构成的。
Nowadays, many PCBs are no longer single functional circuits(digital or analog circuits), but composed of digital and analog circuits.

预计到明年4月将会有一个支持1.05～0.54V电压的版本就绪，并为模拟电路实现优化。
By April, a version will be ready supporting voltages from 1.05 to 0.54 V with more optimization for analog circuits.

但是随著MOSFET技术的不断演进，今日的CMOS技术也已经可以符合很多模拟电路的规格需求。
However, with the development of MOSFET technology, today's CMOS technology can meet the requirements of many analog circuits.

这种类型的网络通信需要在模拟电路的每一端都有一个DTU设备。
This type of network communication requires a modem at each end of the analog circuit.

模拟电路的工艺迁移一直都很棘手，但在FinFET领域，它已经成为一个更大的问题。
Process migration for analog circuitry always has been troublesome, but it has become even more of an issue in the finFET world.

因此，模拟电路的故障诊断问题始终是中频炉故障诊断中的难点和重点。
Therefore, the fault diagnosis of analog circuits is always a difficult point and key point in the fault diagnosis of intermediate frequency furnaces.

它们是最早的机器人，但它们的技术基础是模拟电路，而不是数字化计算机。
These were the first robots, but they were based on analogy circuits instead of digital computers.

除了RF部分，板上通常还有其他模拟电路。
In addition to the RF section, there are usually other analog circuits on the board.

模拟电路往往是非常优美的设计，具有许多组件，或者它们可以非常简单，就像两个电阻串联在一起构成分压器。
Analog circuits can be very elegant designs with many components, or they can be very simple, like two resistors combining to make a voltage divider.

在加入IBM之前，Saumil作为技术实习生在AT&T下属的贝尔实验室工作，为AT&T的电话系统设计和建造模拟电路。
Prior to joining IBM, Saumil was a Technical Intern at AT&T's Bell Labs, where he designed and built analog circuits for the AT&T's phone systems.