Examples of using 耐蚀性 in Chinese and their translations into English
{-}
-
Political
-
Ecclesiastic
-
Programming
耐蚀性选用原则应根据其使用场合而定。
Corrosion resistance selection principles should be based on the use of the occasion.其次它具有耐蚀性、因为他的材质是不锈钢。
Secondly, it has corrosion resistance because its material is stainless steel.主要是：化学稳定性差，耐蚀性不如塑料和玻璃，尤其是普通钢材容易锈蚀。
Mainly: chemical stability is poor, corrosion resistance is inferior to plastic and glass, especially ordinary steel rust easily.纯金属中耐蚀性高的通常具备下述三个条件之一：.
High corrosion resistance in pure metals usually has one of the following three conditions.关于对耐蚀性的影响，试验表明采用该工艺后耐蚀性有所增强。
Regarding the effect on corrosion resistance, tests have shown that the corrosion resistance is enhanced after using this process.此耐蚀性也往往大大降低，当许多含水盐存在，铝门特别是在异种金属的存在下进行。
This corrosion resistance is also often greatly reduced when many aqueous salts are present however, particularly in the presence of dissimilar metals.耐蚀性好又无毒，设备不生锈，伤口不易感染，伤口愈合快；.
Good corrosion resistance and non-toxicity, equipment is not rusted, wounds are not easy to be infected, and wounds heal quickly;纯金属中耐蚀性高的一般具有下述三个条件之一：.
High corrosion resistance in pure metals usually has one of the following three conditions.此耐蚀性也往往大大降低，当许多含水盐存在，铝门特别是在异种金属的存在下进行。
This corrosion resistance is also often greatly reduced by aqueous salts, particularly in the presence of dissimilar metals.其次，塑料窗和钢窗的耐蚀性取决于硬件的使用。
Secondly, aluminum plastic door and window equipment corrosion resistance depends on the use of hardware.主要是：化学稳定性差，耐蚀性不如塑料和玻璃，尤其是普通钢材容易锈蚀。
Mainly: poor chemical stability, corrosion resistance is not as good as plastic and glass, especially ordinary steel is simply rusted.强度比1100约高10%，成形性、溶接性、耐蚀性均良好。
Strength will be 10% higher than in 1100, welding and corrosion resistance are good.因此，不锈钢管件固溶处理应控制在1050℃左右，使碳达到饱和状态，提高耐蚀性。
Therefore, the solid solution treatment of stainless steel pipe fittings should be controlled at around 1050 °C to achieve carbon saturation andimprove corrosion resistance.因此，不锈钢管材固溶处理应控制在1050℃左右，使碳达到饱和状态，提高耐蚀性。
Therefore, the solid solution treatment of stainless steel pipe fittings should be controlled at around 1050 °C to achieve carbon saturation andimprove corrosion resistance.还有5056包覆铝线,广泛用于制作窗纱和其他要求耐蚀性好的线材产品。
There are also 5056 coated aluminum wires, which are widely used in the production of window screens andother wire products that require good corrosion resistance.因添加了Ti元素，故其高温耐蚀性及高温强度较好。
Due to the addition of Ti elements,So the high temperature corrosion resistance and high temperature strength is better.固溶处理后，钢管的耐蚀性恢复到最佳状态。
After 高氮CrMnN奥氏体不锈钢具，无磁性，耐蚀性等特性，在工业上有广泛的需要。
High nitrogen CRMNN austenitic stainless steel, non-magnetic, corrosion resistance and other characteristics, in the industry has a wide range of needs.因此，铝合金具有很好的耐蚀性，腐蚀速率随着时间的延长而降低。
Therefore, it has very good corrosion resistance, and the 其次，塑料窗和钢窗的耐蚀性取决于硬件的使用。
Secondly, the corrosion resistance of plastic steel windows depends on 在这些热浓碱溶液中，材料的耐蚀性主要由其镍含量所决定。
In these hot concentrated caustic solutions, the corrosion resistance is mainly determined by 应添加Mo，故其耐蚀性、耐大气腐蚀性和高温强度特别好，可在苛酷的条件下使用。
Mo is added, so its corrosion resistance, atmospheric 固溶处理后，钢管的耐蚀性恢复到最佳状态。
After solution treatment, the corrosion resistance of 当然，对于不鏽鋼軸承而言，所具有的耐蚀性是相对的，是有一定条件要求的。
Of course, for stainless steel bearings, the corrosion resistance is relative and there are certain conditions.这种热处理即固溶处理(SHT)，它可提高材料的耐蚀性.并使钢软化。
This heat treatment, namely solid solution treatment(SHT),can improve the corrosion resistance of 有时加入少量的铜或锌来提高合金的强度，而不会显著降低耐蚀性。
Sometimes add a small amount of copper or zinc in order to improve 因此在13%Cr钢中，碳含量越低，则耐蚀性越高。
Therefore, 镍：可提高强度和硬度，降低耐蚀性，与铁有同样效果。
Nickel: It improves strength L：控制钢中的C和N含量，故焊接性、成形性和耐蚀性优良；.
(3) 409L: control of steel in the C and N content, so weldability,formability and corrosion resistance is excellent;工业上用的铝和铝合金都需采取保护措施以提高其耐蚀性。
Industrial aluminum andaluminum alloys all require protective measures to improve their corrosion resistance.
