Bootloader has 2 operating modes:.Your phone should reboot into bootloader mode. Bootloader is the same as BIOS on a computer.GRUB- GRUB is the bootloader from the GNU project.
Bootloader is the same as BIOS on a computer.一个unlockbootloader 的选择确认页面会出现。 A bootloader unlock confirmation page will appear. Barebox是为嵌入式系统设计的bootloader 。 Barebox is a bootloader designed for embedded systems. 引导程序Bootloader 是在操作系统运行之前执行的一段程序。 The bootloader executes code before any operating system is launched. 该应用报告描述了AWR1243Bootloader 流程。 This application report describes the AWR1243 bootloader flow. Adbrebootbootloader 在bootloader 模式下重启. Adb reboot bootloader (to reboot into the bootloader ). 华为:“暂无计划”解除Mate30系列的bootloader 限制. Huawei clarifies it has“no plans” to unlock the Mate 30 series' bootloader . ATmega328有32KB(其中0.5KB用于bootloader )存储空间。 The ATmega328 has32 KB(with 0.5 KB used for the bootloader ). 使用ADB工具:在命令窗口下运行:adbrebootbootloader 。 Using the adb tool: With the device powered on, execute: adb reboot bootloader . Bootloader 正式开放,SonyXperia5加入OpenDevices计划.Sony Xperia 5 bootloader becomes unlockable as it joins Open Devices program. 重启软重启电源关闭进入recovery开机进入bootloader . 重启 Soft Reboot Power off Boot into Recovery Boot into Bootloader Boot . Bootloader 是从Atmel的工厂预烧和存储在一个专用的ROM内存。The bootloader is factory pre burnt by Atmel and is stored in a dedicated ROM memory. 您可以使用ISP头与一个外部的程序员(DFUbootloader 的覆盖)。 Or you can use the ISP header with an external programmer(overwriting the DFU bootloader ). 简单的说,BootLoader 就是在操作系统运行之前运行的一段小程序。 In simple words, Bootloader is a piece of code that runs before any operating system is running. Bootloader 是严重地依赖于硬件而实现的,特别是在嵌入式世界。Usually, BootLoader is heavily dependent on the hardware implementation, especially in the embedded world. 它由syslinuxbootloader 的同一作者开发,因此不会导致很多问题。 It's written by the same author as the syslinux bootloader and is therefore least likely to cause issues. 众所周知的引导程序有LInuxLOader(LILO)及广泛使用的GrandUnifiedBootloader (GRUB)。 Examples of Linux boot loaders are LILO(LInux LOader), and GRUB(GRand Unified Bootloader ). 通常,BootLoader 是严重地依赖于硬件而实现的,特别是在嵌入式世界。 Usually, BootLoader is heavily dependent on the hardware implementation, especially in the embedded world. 现在,从老的GrandUnifiedBootloader (GRUB)Legacy工具到新的GRUB2过渡正在进行。 Currently, a transition from the old Grand Unified Bootloader (GRUB) Legacy tool to the new GRUB 2 is underway. 通常,BootLoader 是严重地依赖于硬件而实现的,摇钱树主论坛,特别是在嵌入式世界。 Usually, BootLoader is heavily dependent on the hardware implementation, especially in the embedded world. GNUGRUB的前身为GrandUnifiedBootloader ,由ErichStefanBoleyn设计和实现。 It was derived from GRUB, the GRand Unified Bootloader , which was originally designed and implemented by Erich Stefan Boleyn. 例如,/boot/目录中包含启动文件的目录(例如内核,initrd和引导加载程序GRandUnifiedBootloader (GRUB))。 For instance, the directory of/boot/ mounts boot files(such as the kernel, initrd, and bootloader GRand Unified Bootloader (GRUB)). Bootloader 引导模式基本上包括启动操作系统内核的指令,大多数Bootloader引导模式都有自己的调试或改造环境。Boot loaders basically package the instructions to boot operating system kernel& most of them also have their own debugging or modification environment. BIOS实际上需要做的事情是加载第一段代码(称为引导加载程序(bootstraploader)或bootloader ),并让机器开始运行。 All the BIOS really had to do was load that first chunk of code(called the bootstrap loader, or bootloader ) and let the machine run. 研究人员注意到,bootloader 很难用软件进行分析,部分原因是由于它们是闭源代码开发的,且具有硬件特性,所以很难进行逆向工程。 According to them, bootloaders are hard to analyze with software partly because they are closed source, hardware specific, and hard to reverse-engineer.
Display more examples
Results: 42 ,
Time: 0.0164