Examples of using Applied load in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Applied load range was 0.08- 5 mN.
Tables are available to allow easy selection of a suitable steel I-beam size for a given applied load.
Tensile testing is a method of evaluating the structural response of steel to applied loads, with the results expressed as a relationship between stress and strain.
Simultaneous tensioning- multiple bolt tensioners can be hydraulically actuated at the same time.Uniformity- tensioning several bolts at the same time guarantees the same applied load to each bolt.
Impact strength, is the capability of the material to withstand a suddenly applied load and is expressed in terms of energy.
Particular attention must be paid to machining tolerances, different mechanical properties that may require design modifications, higher thermal expansion, possible deformations in caseof long term applied loads(creep), and changes in properties with temperature.
The instrumented indentation technique used by the Nano Hardness Tester plots the penetration depth of the indenter as a function of the applied load over the entire loading and unloading portions of the test.
We did not immediately find a COTS solution for customised signal conditioning along with switching and applying loads, so we started an internal development project to integrate the NI equipment with our simulators.
Be sure lifting arm is fully under load applied.
Days Creep Testing Used to determine the Load Applied Initiated& Sustained.
Most caster wheels wear out quickly because of the load applied to it.
For shear-thinning and shear-thickening samples, the viscosity depends on the load applied to the sample.
A load applied through the push-rod itself maintains it in mechanical contact with the measuring system while it is subjected to a thermal treatment.
Non-Repetitive Peak Surge Current(Surge applied at rate load conditions halfware, single phase, 60Hz) IFSM 30 A.
Guardrails and Handrails shall be designed to withstand a 200lb concentrated load applied in any direction and at any point on the top rail.
High-performace bearings are used in both the roller and blade, so the cutter turns easily with only slight force even with the cutting load applied.
Secondly, the software will allow the operator to generate a single load report within Microsoft Word- this report details the load applied and the time and date of test.
The record function of the MDA-500 Series can be used to check DC bus performance dynamically in the operating mode while a load is applied.
Hyundai Auto Inverter Chiller can maintain±0.1℃ at stable load with the applied intelligent controller and PID control.
Numerous load testing applications worldwide require a load cell to verify the load applied.
Even under high pressure load, the energy applied by a fisherman can be transmitted directly to the gears, improving starting power.
BMSW motor can be applied to situations with less load and interval operation of all wheel vehicle, such as wheel loader, wheel crane, tractor, etc.
OMEGA's LC204 Series Load Cell is designed to be surface mounted with the load applied through the mounting stud.
Description OMEGA's LCM204 and LCM214 Series Load Cell is designed to be surface mounted with the load applied through the mounting stud.
Wind, ice, and seismic loads following the TIA and other standard reference load codes can be applied.
Advanced fuzzy control technology is applied to auto load control of grinder.
Or when large increments of load are applied to the engine.
Applied the coil car to load the coil more safe and easily.
Understand that pressure and/or load can be applied only to faces uniformly and constantly.