The EV kit includes an evaluation board and a graphical user interface(GUI) that provides communication from a PC to the target device through a USB port.
This enables control of the tuner through the MAX2175's graphical user interface(GUI) software, which provides extensive access to the device's features.
A Windows®-based graphical user interface(GUI) communicates with the boards for generating various analog signal test patterns and simplified access to AFE measurement data.
Windows®-based software provides a user-friendly graphical user interface(GUI) as well as a detailed register-basedinterface to exercise the features of the MAX77654.
Windows® based graphical user interface(GUI) software is available for use with the EV system and can be downloaded from the MAX77860 product page on the Maxim website.
A simple and intuitive graphical user interface(GUI) provides communication with the EV kit through Windows® OS running Windows XP®-, Windows 7-, or Windows 8-compatible software.
A simple and intuitive graphical user interface(GUI) provides communication with the EV kit through Windows® OS running Windows XP®-, Windows 7-, or Windows 8-compatible software.
The EV kit includes an evaluation board and a graphical user interface(GUI) that provides communication from the target device to the PC through a ZedBoard with a Xilinx Zynq® -7000 SOC.
MAX35104EVKIT Evaluation Kit for the MAX35104- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX35104 evaluation kit(EV kit)provides the hardware and graphical user interface(GUI) software necessary to evaluate the MAX35104 time-to-digital converter designed for ultrasonic heat, water, and gas meters.
The MAX41460 andthe MAX41461-MAX41464 evaluation kits operate in conjunction with an external microcontroller(MCU) and Graphical User Interface(GUI) software running on a computer.
The EV kit includes the MAX14915 evaluation board and a graphical user interface(GUI) that provides communication from a PC to the target device through a USB port and the USB2GPIO interface board.
The MAX2771 EV kit contains a microcontroller(MCU) that translates between the three-wire SPI interface and USB to allow the user to configure internal registers andmodes with Graphical User Interface(GUI) software running on a PC.
MAX31865EVKIT Evaluation Kit for the MAX31865- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX31865 evaluation kit(EV kit)provides the hardware and software(graphical user interface) necessary to evaluate the MAX31865 RTD-to-digital Converter.
MAX31911EVKIT Evaluation Kit for the MAX31910 and MAX31911- Maxim Description Create a design and simulate using EE-Sim® tools: The MAX31910/11 evaluation kit(EV kit)provides the hardware and software(graphical user interface) necessary to evaluate the MAX31910 and MAX31911 industrial octal digital input translators/serializers.
日本語
中文
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt