A BIC inductive coupler provides energy and signal transmission.
IO-Link 신호 전송을 위한 인덕티브 커플러.
Inductive couplers for IO-Link signal transmission.
인덕티브 센서 - 원주형, 직사각형, 플랫 하우징, 슬롯 및 링 형 마운팅 액세서리.
Inductive sensors- Cylindrical, rectangular, flat housing, slot and ring type.
실린더의 최종 위치 제어용 인덕티브 센서 M18.
Inductive sensor M18 for end position control on the cylinder.
M12 인덕티브 센서 는 터빈의 정확한 회전 및 기능을 모니터링합니다.
The M12 inductive sensor monitors the correct rotation and functioning of the turbine.
풍력 발전소의 풍력 터빈에 M12 인덕티브 센서 사용.
Wind power plants use M12 inductive sensors in wind turbines.
인덕티브, 포토, 정전 용량, 마그네틱 및 초음파 센서 가 포함 됩니다.
It consists of inductive, photoelectric, capacitive, magnetic, and ultrasonic sensors.
서버모터 축의 참조 위치는 인덕티브 근접 스위치 를 통해 결정됩니다.
The reference position of the servo-motor axes is determined via inductive proximity switches.
M12 원통형 인덕티브 센서 는 풍력 터빈 에 사용되어 엔진실 이동을 제어합니다.
The M12 cylindrical inductive sensor is used in a wind turbine to control the nacelle movement.
발루프의 전원 공급을 위한 인덕티브 커플러는 에어 갭을 통해 비접촉 방식으로 에너지를 전달합니다.
Our inductive couplers for power supply transmit power contactlessly across an air gap.
NJ15-M1K-A2 인덕티브 근접 스위치 는 리프트 체인의 투스 프로파일을 감지하는 데 사용됩니다.
NJ15-M1K-A2 inductive proximity switches are used to query the tooth profiles of the lift chain.
Gerstlauer는 수 년 동안 Pepperl+Fuchs의 입증된 VariKont 인덕티브 센서를 사용하고 있습니다.
For many years Gerstlauer has been using the proven VariKont inductive sensors from Pepperl+Fuchs.
Pepperl+Fuchs의 WIS 인덕티브 전환 시스템 은 지능적이고 효율적으로 작동됩니다.
The WIS inductive transfer system from Pepperl+Fuchs operates intelligently and efficiently.
클램핑 실린더의 회전이동은 정확도가 높은 인덕티브 위치 제어 시스템 F90 으로 모니터링합니다. 바로가기 방폭.
The travel of the rotating clamping cylinders is monitored by the high precision, inductive positioning system F90.
이 스위치는 작고 저렴한 인덕티브 근접 스위치 이며 스위칭 거리가 증대되고 M8 x 1 커넥터가 포함되어 있습니다.
This is a small, affordable inductive proximity switch with an increased switching distance and M8 x 1 connector.
인덕티브 센서 는 압력계 및 유량계 등 측정 장치에 적용되여 정밀하고 안정적인 감지를 제공합니다.
Inductive sensors are also used for accurate and reliable detection in measurement devices such as manometers and flowmeters.
이 센서는 편차가 0.4°이며 견고하고 입증된 인덕티브 센서 기술을 기반으로 아날로그 출력을 제공합니다.
The device has an accuracy of 0.4° and provides analog output based on the robust and proven inductive sensor technology.
IO-Link 신호 전송을 위한 인덕티브 커플러는 에어 갭을 통한 데이터와 에너지의 비접촉 전송을 가능하게 합니다.
Inductive couplers for IO-Link signal transmission are used for non-contact transmission of power and data over an air gap.
인덕티브: 결합된 한 쌍의 인덕터는 2개의 회로를 절연하면서 자속(magnetic flux)을 통해 데이터를 교환하는데 사용할 수 있다.
Inductive: A pair of coupled inductors can be used to isolate two circuits while exchanging data through magnetic flux.
발루프의 신호 전송을 위한 인덕티브 커플러는 최대 8개의 센서 신호와 8개의 액추에이터 작동 신호용으로 설계되었습니다.
Our inductive couplers for signal transmission are designed for up to eight sensor signals and eight actuator control signals.
두 개의 LUCIFER 기구 상태(저온 유지 장치 온도 조절기가 정확하고 확실하게 실링됨)는 또한 인덕티브 센서를 통해 감지됩니다.
The state of the two LUCIFER instruments(cryostatic temperature regulator correct and tightly sealed) is also detected via inductive sensors.
이 어플리케이션에 사용된 이러한 인덕티브 센서 의 또 다른 한 중점 사항은 용접 필드에 대한 외부의 전기적 및 기계적 내성입니다.
Another highlight of the inductive sensors used for this application is the electrical and mechanical resistance to external welding fields.
WI 만약 공간의 부족이 여러분이 변위센서를 사용하시는 것을 방해 했다면, 아마 이제 여러분들은 WI 시리즈의 인덕티브 미니어처 프로브를 생각해 보실 수 있습니다.
WI If lack of space was stopping you using inductive displacement transducers before, now you can use the new miniature probes from the WI series.
회전 기구를 락킹하기 위하여 NBN4 시리즈 인덕티브 센서는 비 접촉식으로, 기구에 임시적으로 연결된 호스 및 케이블을 감지합니다.
To lock the rotation drive the presence of temporarily connected hoses and cables at the instrument is detected contact free via series NBN4 inductive sensors.
Pepperl+Fuchs는 위험 영역에 사용되는 유량계 및 압력계 등 위치 제어 및 측정 장치 에 안정적이고 정밀한 인덕티브 센서를 제공합니다.
Pepperl+Fuchs provides reliable and accurate inductive sensors for applications in positioners and measurement devices like flowmeters and manometers for hazardous areas.
데이터를 양방향으로 전송하는 양방향 인덕티브 커플러를 사용하여 밸브 터미널 등의 액추에이터 제어와 신호 수집을 동시에 실시할 수 있습니다.
The bi-directional inductive data couplers allow data to be sent in both directions, and you can simultaneously control actuators and valve terminals while collecting signals.
고온 인덕티브 근접 센서 NCN25-F35 는 최대 250 °C의 페인트 라인에 사용되며, 헤드 및 증폭기 연결 케이블은 온도에 영향을 받지 않는 재료로 구성됩니다.
High temperature inductive proximity sensor NCN25-F35 is used in a paint line at temperatures up to +250 °C. Its head and the connecting cable to the amplifier consist of temperature-proof materials.
한국어
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文