Integrated drive spindle for milling head adaptor.
주축 높이 1,060mm.
Main spindle height 1060mm.
인덱싱 분 메인과 서브 주축 C 축 0.001 °.
Main and sub spindle C axis min indexing 0.001°.
주축 간 거리 mm 500.
Distance between two spindle mm 500.
Schaeffler Korea 업종 / 핵심 산업 씰링형 주축 베어링.
Schaeffler Korea Sectors& Key Industries Sealed spindle bearings.
주축 회전수 7500 rpm 7500 rpm.
Spindle Speed 7500 rpm 7500 rpm.
모터의 주축선은 자기를 삭제하는 세라믹 도금 입니다.
The principal axis of the motor is ceramic plating to eliminate the magnetism.
주축 최대 드릴링 직경 Φ13mm.
Main spindle max drilling diameter Φ13mm.
공기 냉각 스핀들 3 KW 주축 큰 힘, 안정되어있는 성과.
Air-cooled spindle 3.0 KW main spindle big power, stable performance.
주축을 따라 플렉스 항목의 비율 제어하기.
Controlling Ratios of flex items along the main axis.
CSS Flexbox Guide: 주축을 따라 플렉스 항목의 비율 제어하기.
CSS Flexbox Guide: Controlling Ratios of flex items along the main axis.
울트라레이지는 2019년 여름에 근영(전 검엑스, 현 풀게라지)을 주축으로 위닝샷이 광야와 함께 만들어졌다.
UltraLazy was formed in the summer of 2019 by Keunyoung(ex-GumX, Full Garage) and Gwangya(Winningshot).
모든 주축과 전방베이스, 캐리지는 FC30 ~ FC35까지 고 변형 주조로 주조됩니다.
All the headstock and front base, carriage are cast in high strain casting up to FC30~FC35.
소프트 브레이크 인버터 모터에 의해 구동되는 주축, 그리고 회전 속도가 작동 패널 제어기에 의해 조정된다.
The main shaft driven by inverter motor with soft-brake, and rotating speed is adjusted by controller on operational panel.
터빈 엔진의 주축은 매우 빠른 속도로 회전하고 고온 조건이 변하는 환경에서 작동합니다.
The mainshaft in a turbine engine rotates at very high speeds and operates in an environment of changing high temperature conditions.
아름다운 한 조각의 단풍 나무 뒤, 아름다운 flamed,갈빗대와 충격적인 주축과 목, 최초의 갈색 / 오렌지색 바니시.
A beautiful one-piece maple back,beautiful flamed, ribs and stunning headstock and neck, original brown/orange varnish.
이 유대감을 표출하는 가장 흔한 방법으로는 소위 말하는 유대-기독교 전통을 브라질 문화의 주축으로 내세우는 것이다.
The most common way to express this association is to proclaim a so-called Judeo-Christian tradition as the main pillar of Brazilian culture.
HSRV/HSRVE 시리즈 내장형 / 외장형 회전자, 고속, 최고 주변 속도 50m/s,50kW, 주축 응용 장치용, 고객 맞춤형.
HSRV/ HSRVE Series internal/ external rotor, high speed, up to 50m/s peripheral speed,50kW, for spindle applications, customer specific.
당사는 고객, 직원 및 비즈니스 협력사의 건강한 삶의 주축이 되고자하는 바램 아래 세 가지 가치를 주요 이념으로 삼았습니다.
There have been three main values under the best wishes to be the axis of the health life for our customers, employees and business collaborative companies.
이 스타트업은 2013년 불가리아 국립 예술 아카데미 학생인 Tzveta-Maria Partaleva 그리고 Stan Partalev를 주축으로 설립되었습니다.
The start-up was founded in 2013 by a group of students from the Bulgarian National Academy of Art, led by Tzveta-Maria Partaleva and Stan Partalev.
주축 베어링 격실 씰은 엔진을 통해 흐르는 고온 가스로부터 로터지지 베어링을 보호하고 베어링 실 내의 윤활유 손실을 방지하는 데 사용됩니다.
Mainshaft bearing compartment seals are used to protect rotor support bearings from hot gases flowing through the engine and to prevent the loss of lubricant in the bearing compartments.
해리 레드냅 감독 하에 보낸 2009-10 시즌,베일은 선수단의 주축이 되었고, UEFA 챔피언스리그 2010-11에서의 활약으로 국제적 관심을 받기 시작했다.
From the 2009-10 season, under the guidance of Harry Redknapp,Bale became an integral part of the team, rising to international attention during the 2010-11 UEFA Champions League.
한국어
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文