BALBULA KATAWAN Meaning in English - translations and usage examples

• valve body
• throttle body

Examples of using Balbula katawan in Tagalog and their translations into English

Balbula Katawan tanso 1.
Valve Body Brass 1.

Fixed bahagi para sa balbula katawan.
Fixed side for valve body.

Balbula katawan pampainit ng makipot na look.
Throttle body heater inlet.

Nakaraan: Fixed bahagi para sa balbula katawan.
Previous: Fixed side for valve body.

Bottom Gabay Balbula katawan- One-piraso Forge….
Bottom Guide Valve Body- One-Piece Forge….

Kapag pinapalitan ang o-rings, linisin ang loob ng mga alulod at sa labas ng balbula katawan.
When replacing the o-rings, clean the inside of the spout and the outside of the valve body.

Nito pangunahing sangkap ay ang balbula katawan, at spool at tagsibol.
Its main components are the valve body, and spool and spring.

( 1) Lift: balbula katawan upang ilipat sa kahabaan ng vertical centerline.
(1) Lift: valve body to move along the vertical centerline.

Mahirap i-posisyon ang bola sa gitna ng balbula katawan pagkatapos ng paglipat ng mga filter.
It is difficult to position the ball in the center of valve body after switching filters.

Balbula katawan( Material) Ibabaw ng paggamot cast phosphating ibabaw.
Valve body（Material）Surface treatment casting phosphating surface.

Ito ay naka-install sa balbula katawan nang direkta sa balbula plate.
It is installed on the valve body directly on the valve plate.

Balbula katawan( Material) Ibabaw ng paggamot( Steel katawan) Surface malinaw sink kalupkop.
Valve body（Material）Surface treatment（Steel body）Surface clear zinc plating.

Nababanat wedge, ay maaaring awtomatikong iakma sa pipe ng stress na sanhi ng pagpapapangit ng ang balbula katawan.
Elastic wedge, can automatically adapt to the pipe stress caused by the deformation of the valve body.

China 55559352 balbula katawan heater pumapasok tagagawa at supplier Hengyi.
China 55559352 throttle body heater inlet manufacturers and suppliers Hengyi.

Bawasan ang paikot na metalikang kuwintas, suportahan ang stem, at gawin itong hiwalay mula sa balbula katawan epektibo, bawasan ang wear ng balbula stem.
Reduce the rotational torque, support the stem, and make it separate from the valve body effectively, reduce the wear of the valve stem.

Ang balbula katawan sa pamamagitan ng mga espesyal na salamin processing at mahirap sa paggamot.
The valve body by the special mirror processing and hard treatment.

Pag-install ng hangin butas na tumutulo, electromagnetic pulse balbula katawan at hangin pagtulo ng spray pipe interface, higpitan raw materyal belt o abaka pipe salansan.
Installation of air leakage, electromagnetic pulse valve body and air leakage of spray pipe interface, tighten raw material belt or hemp pipe clamp.

Ang balbula katawan ay pinahiran na may pulbos epoxy dagta upang maiwasan ang kaagnasan at kalawang ng balbula katawan.
The valve body is coated with powder epoxy resin to prevent corrosion and rust of the valve body.

Ang katigasan at lakas ng balbula bushing materyal ay hindi dapat mas malaki kaysa sa stem, at hindi ito bumuo ng electrochemical kaagnasan sa balbula stem at balbula katawan sa ilalim ng kondisyon ng tubig pagsasawsaw.
The hardness and strength of the valve bushing material should not be greater than that of the stem, and it will not form electrochemical corrosion with the valve stem and valve body under the condition of water immersion.

Ang balbula katawan ay dapat na makapag-dalawa ng dalawang beses ang balbula sa ilalim ng balbula pagbubukas kondisyon.
The valve body should be able to bear two times the valve under the valve opening condition.

XQ Serye Quick pagkaubos balbula ay karaniwang-install sa pipeline sa pagitan ng cylinderand pagbabago balbula at mawala sa silindro upang paganahin ang mga silindro upang direktang discharge hangin na walang ang pangangailangan upang pumunta sa pamamagitan ng mga pagbabago balbula at sa gayon ay epekto sa pagtataas ng bilis ng paggalaw ng silindro, port size G1/ 8~ G1/ 2 tanso/ sink haluang metal materyal balbula katawan.
XQ Series Quick Exhausting valve is generally installed in the pipeline between the cylinderand change valve and lose to the cylinder to enable the cylinder to directly discharge the air without the necessity to go through the change valve and so as effect on raising the movement speed of the cylinder, port size G1/8~G1/2 brass/ Zinc Alloy material valve body.

Ang balbula katawan materyal ay dapat na cast bakal, cast bakal, hindi kinakalawang na asero, 316L at markahan ang pisikal at kemikal na pagsubok ng data ng grado at cast bakal.
The valve body material should be cast iron, cast steel, stainless steel, 316L and mark the physical and chemical test data of the grade and cast iron.

Ang balbula katawan ay ginawa sa pamamagitan ng paghahagis ng katumpakan at tumpak na dimensyon ng geometriko, upang ang katawan ng balbula ay ma-selyadong nang walang anumang pagtatapos ng trabaho sa hilaga.
The valve body is made by precision casting and precise geometric dimension, so that the valve body can be sealed without any finishing work in the north.

Ang istraktura na ito ay epektibong nagwawasto sa tolerance belt sa pagitan ng baras manggas at katawan balbula at ang nababanat pagpapapangit ng balbula stem sa ilalim ng presyon ng daluyan, at malulutas nito ang sealing problema sa dalawang-way interchangeability ng daluyan.
This structure effectively compensates the tolerance belt between the shaft sleeve and the valve body and the elastic deformation of the valve stem under the pressure of the medium, and solves the sealing problem in the two-way interchangeability of the medium.

Ang hindi kinakalawang na asero singsing ikinabit sa katawan, tulad ng kono istraktura, kaaya-aya sa fluid sirkulasyon, ngunit din mapabuti ang paghahagis kalidad ng mga panloob na lukab ng katawan balbula, bawasan ang daloy ng paglaban.
The stainless steel ring mounted on the body, as the cone structure, conducive to fluid circulation, but also improve the casting quality of the inner cavity of the valve body, reduce the flow resistance.