Примеры использования An ethernet cable на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
NETWORK jack: Connect to the network with an ethernet cable.
Connect an Ethernet cable to the WAN Port on the rear panel.
Connect the router to this display with an Ethernet cable.
Simply connect an Ethernet cable to the Ethernet port.
Connect your TV to your modem/router via an ethernet cable.
Connect an Ethernet cable to the LAN1~LAN4 Port on the rear panel.
Connect your SC-T46 to your local network with an Ethernet cable.
Connect an Ethernet cable to Private Port on the rear panel.
Connect your PC to the router using an Ethernet cable.
Connecting an Ethernet cable turns off the printer's wireless capabilities.
Connect the network camera to a hub via an Ethernet cable.
Most units will need an Ethernet cable run for an internet connection.
The tester host andtester notebook are connected via an Ethernet cable.
Plug an Ethernet cable into the Ethernet connector on the media player.
To connect to a home network using an Ethernet cable.
You will require an Ethernet cable, which is not included in the delivery.
One isn't supplied in the box,neither is an ethernet cable.
If you have connected with an ethernet cable, select"Wired(Exit)" and confirm.
Connect the network camera to a switch or router via an Ethernet cable.
An Ethernet cable transmitting the data and a power cable providing the energy supply.
Inside the box we have the repeater, an Ethernet cable and a manual.
After an Ethernet cable is plugged in a Hotspot can be set up in a few steps.
Connect Zeppelin Wireless to your computer with an Ethernet cable, see Diagram 3.
Connect an Ethernet cable to one of the Ethernet connectors at the back of the system.
Inside the package we have the repeater, an Ethernet cable and a few small manual.
Most Android TV boxes will need to first be connected to the internet with an Ethernet cable.
You can either use an Ethernet cable or connect with WiFi to the modem router.
The display can be connected to medical imaging systems via an Ethernet cable or a WiFi interface.
Plug an Ethernet cable(sold separately) into the Ethernet connector on the media center.
Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3410 will turn green to indicate a proper connection and power to the unit.