Примеры использования Input signals на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
The projector will start to search for input signals.
The input signals in conformity with the system format.
This function does not work for RGB input signals.
For input signals- the Wait Signal command;
Auto Automatically selects audio input signals.
Input signals quality control through dedicated windows;
Auto Automatically selects audio input signals.
Input signals are automatically identified by the SCART(pin 8) terminal.
These adjustments are effective for all input signals.
Our technology uses two input signals to identify bumps.
All other settings are stored in memory for all input signals.
Each of the input signals can be transferred to any of the three output lines.
Use this antenna connection for DVB-T and DVB-C input signals.
Ii. To switch between input signals, click on your desired signal. .
The(rotation) setting is stored in memory for all input signals.
Widest range of SD and HD input signals, including 3G-SDI and DisplayPort.
In the Auto mode, the images may be disturbed when the input signals are switched.
Input signals of the same encoder can be generated into different output channels.
Only the special Pin 7, 8 and 9 accept input signals from 5 Volts.
The input signals connected to the“A” channels is also available at these LINK outputs.
This function is only available when PC, Video input signals were selected.
In this case if input signals are not synchronous then synchronization is disrupted.
Using the PURE DIRECT switch(AX-497 only) Routes input signals from your audio sources.
TV receives input signals automatically connecting with SCART when playback starts.
Type OM 502LX is a precision 5-digit panel programmable display for nonlinear input signals.
Switching input signal Different input signals can be used to connect with the projector.
The input signals connected to the INPUT A connectors is available on the Preamp Output connectors.
The signal which outputs the programme output statuses of the input signals to an external device.
Special sensor designs with two input signals for"open"/"closed" are available for position monitoring.
Up to 2 x 3 input signals can be connected at optionally different voltage levels or reference potentials.