Примеры использования Low-pass filter на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Low impedance+ Low-pass filter.
Low-Pass Filter Frequency Control.
Infinitely adjustable low-pass filter.
Low-pass filter with variable transfer frequency.
Infinitely adjustable low-pass filter 50- 250 Hz.
Low-pass filter with adjustable cross-over frequency.
Available options: Filter: Low-pass Filter LPF.
Hardware low-pass filter;(applicable to most situations).
No drop of Tin you get a Schmitt Trigger,with input low-pass filter.
Voltage-controlled low-pass filter(LP VCF) which is built on two CEM3320.
Set the desired transfer frequency on the low-pass filter control 4.
Two-stage low-pass filter(LPF) with a slope of 12 dB per octave.
In the BD 1 section there is a"Noise Generator" that adds"grains",as well as a low-pass filter.
The voltage controlled low-pass filter has a classic Moog structure.
Low-pass filter and subsonic filter with adjustable cross-over frequency.
Each of the voices has its own dedicated low-pass filter based on a chip designed by Curtis.
The low-pass filter circuit which was used in the early products was put in there as well.
Concertmate MG-1 uses a four-stage voltage controlled low-pass filter with a cutoff slope of 24 dB per octave.
Slim optical low-pass filter exploits the full potential of the lens.
The 3-channel mode uses the high-pass filter for channels 1/2 and the low-pass filter for Channels 3/4.
The voltage-controlled low-pass filter is built on CA3080 chips, the same ones were used in SEM modules.
The delay effect is assigned to a separate control unit on the front panel,the first controller of which manages the low-pass filter.
The voltage controlled low-pass filter(LP VCF) has cutoff, resonance and modulation depth adjustment.
The second is built on a discrete circuit with the use of transistors and represents a low-pass filter(LP) with switchable slope of 12 or 24 dB per octave.
The voltage-controlled low-pass filter(LP VCF) uses a four-stage design with a slope of 24 dB per octave.
There are two analog oscillators and two sub-octave generators, four LFOs,three 5-stage envelope generators, a low-pass filter per voice.
The noise generator has a decay/gate,as well as a low-pass filter with 7 types of resonance and a simple velocity envelope.
Powerful low-pass filter 9 order, designed to be installed at the output of transmitters operating in the frequency range 0.
As a filter, the ARP4075 module is used- a four-stage low-pass filter with a cutoff slope of 24 dB per octave.
The system includes a low-pass filter(LPF) also having Polivoks features- resonance and self-oscillation, a dual-mode H-ADSR/AHDSR envelope generator, and transistor subwoofers.