Примеры использования Mm wide на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Coil magnet, just 70 mm wide.
E= 700 mm wide central beam.
Is a roll of 30 meters with 5 mm wide.
Size: at least 130 mm wide and 50 mm high.
Came pretty tape! Is a roll of 30 meters with 5 mm wide.
Size: at least 130 mm wide and 50 mm high.
Leaves are tubular, shorter than the scape, 2-3 mm wide.
White flowers form singly, around 15 mm wide, usually from October to December.
The horizontal beam geometry is 5 mm wide.
Workpieces up to 52 mm high and 97 mm wide can be cut in the following manner.
Sheeting and dividing head 120 mm wide.
Workpieces up to 115 mm high and 75 mm wide can be cut in the following way.
Size of breaking jaws 600 mm high/ 400 mm wide.
Workpieces up to 50 mm high and 97 mm wide can be cut in the following way.
These are followed by thin leathery pods which are 4-17 cm long and 10-19 mm wide.
Iron body track is 38 mm wide, Aluminum.
The minimum character size shall be 5 mm high and 3.5 mm wide.
Only 123 mm wide and 1 285 mm long lamella, with four sides wit micro bevelled edges, allows to create a beautiful effect of parquet floor.
A paper machine can produce an unlimited number of master(jumbo) rolls, each 5600 mm wide.
Those fired and retrieved in Gaza were 4 cm long andapproximately 2- 4 mm wide, having a pointed end and a fletched end.
It grows up to 2 metres high and has small, narrow leaves that are about 10 mm long and 3 mm wide.
The two conventional tangential threshing units with their 640 mm wide threshing channel and a 450 mm threshing drum diameter ensure an efficient threshing performance.
These are followed by straight or slightly curved seed pods that are 4 to18 cm long and 4 to 8 mm wide.
Details are scarce for the moment, but at least we know the Vision RSis 4356 mm long, 1810 mm wide, and 1431 mm tall, with a wheelbase stretching at 2650 mm. .
Tube diameter 25 mm and 38 mm, fin height and generally the 12~15 mm, tubes 100~3000 mm wide.
The fixture is composed of two steel frames, with machined borders 50 mm wide, fitting one over the other and faced with rubber gaskets about 3 mm thick and 15 mm+- 1 mm wide and of hardness 70 IRHD.
ISO 10319 is a test method for determining the tensile properties of geosynthetic materials using 200 mm wide strips.
Supporting fixture, such as that shown in figure 1,composed of steel frames, with machined borders 15 mm wide, fitting one over the other and faced with rubber gaskets about 3 mm thick and 15 mm wide and of hardness 50 IRHD.
At the miter angle of left 45 and bevel angle of left 45, workpieces up to 66 mm high and 170 mm wide can be cut.
Leaves are broadly elliptical, ovate or oblong-ovate, 6-25 mm long,3-12 mm wide, covered with glandular hairs, stalks are covered with short hairs, inflorescences are collected at the tops of stems, capitate- or spherical-shaped, the flowers are pink or light purple color.