Примеры использования Pulse output на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
PWM_OC MSB: Pulse output Read only.
Configurable binary outputs, limit value or pulse output.
Vortex Flowmeter- Pulse Output DVZ-… F3.
Status/ Pulse Output, active or passive, highC or Namur.
Piston Flowmeter- Pulse Output DRZ-… F.
For the pulse output the set number of pulses are displayed once in a second!
Rotating Vane Flowmeter- Pulse Output DFT-13.
High voltage pulse output is uniform and controllable;
Rotating Vane Flowmeter- Pulse Output DFT-11.
For example: A pulse output to a frequency output or a status output to a control input.
Turbine Wheel Flowmeter/ monitor- Pulse Output DRS-… F5.
Analog outputs, interface and pulse output mutually.
Pulse Output diagnostics are only available on units which have the optional Transistor Output interface.
Vane Flowmeter- Pulse Output DF-H.
Set"Output B" to phase shifted mode in menu C2.3.10 by choosing the base pulse output A or D.
Function Can be set as a pulse output or frequency output. .
M12 connector assignment 1:+ Auxiliary voltage 2:Not assigned 3:- Auxiliary voltage 4: Pulse output.
Rotating Vane Flowmeter- Pulse Output DPL-… F5.
The pulse output and second mA output(commonly used for temperature) in the TA2 share a common ground.
Multiple communication options: 4… 20 mA HART,active pulse output and RS485 Modbus.
Has 1 current output, 1 pulse output and 2 status outputs/ limit switches.
Our T21sicpu silicon heat controller works for all our most batteries except those PC(Pulse output only) types.
The pulse output can be set as status output/limit switch and one of the status outputs as a control input.
Frequency output: in pulses per time unit(e.g. 1000 pulses/s at Q100%); Pulse output: quantity per pulse. .
A selection of maximum frequency ensures that the pulse output from the TA2 does not exceed the maximum allowable frequency of any external counter.
The attached illustration shows a recommended solution using a solid staterelay between the flow computer and the active TA2 pulse output.
Primary signal processing(input amplifier, analog/digital converter)Current output Pulse output additionally for IMoCom signal converters.
For Modular I/Os, the pulse output or frequency output at terminal D must be configured to active/passive/NAMUR before connecting it.
If the two GM tubes(Geiger Muller)emit a pulse at the same time the door U1B reveals this coincidence with a pulse output that the Red led.