Примеры использования Speed range на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Speed range km/h.
Test speed range.
Speed range- best in its class.
Test speed range.
Machining Head(spindle) speed range.
Speed range from 0,0001 to 1016 mm per minute.
Spindle turning speed range 7000.
Reduced speed range for 110- 115 V connection voltage.
Big starting torque,wide speed range.
Tolerable speed range for one deviation.
Measurement of viscosity of liquids in the speed range of 5… 250 RPM.
Spindle speed range inverter drive.
See the table on the previous page for speed range information.
ΔS Total speed range of the testing run.
Another innovation is the wide, freely selectable speed range from 700 to 3,000 min-1.
Ejection speed range: from 90 to 350 km/h;
Its display shows filter saturation, air flow,operating hours and speed range.
What vehicle speed range should be used?
Simultaneously are improved all performances: increased aerodynamic efficiency,widened speed range of the wing.
The test speed range as specified in paragraph 4.3.1.1. above shall be selected.
NOTE: Continuous use in variable speed range is not recommended.
The speed range can be adjusted with the ON-OFF switch/speed control.
M, a wide range of covering,full speed range higher than competitors.
The speed range of an actuator is based on the sizing, defined by the application.
There is a long positive andnegative trimmer range on the Luna giving a very nice and usable speed range.
The mapping speed range shall be in accordance with paragraph 7.4.2.
Drive the vehicle at an initial constant speed between 4 km/h and 11 km/h andthe gear ratio capable of covering the speed range of 19 km/h.
S1 Additional speed range after Final speed Minimum 2 km/h.
New APP Technology(Automatic Pressurised Profile)- commonly known as"Shark Nose"- installed for constant internal pressure allowing wider safe speed range and superior glide.
Crosshead speed range from 0.0005 to 1000 mm/ min, an arbitrary continuously adjustable.