Примеры использования Two pins на Английском языке и их переводы на Русский язык
{-}
-
Colloquial
-
Official
You need two pins, I will get two pins.
Now you do everything with just Master andadvance even two pins.
Description of price two pins ptc resistor 18ohms.
For two pins, I would detonate that wretched bomb myself!
Applications of price two pins ptc resistor 18ohms.
Slowly extract the disk from the tray,releasing it from the remaining two pins.
Applications of lower price two pins PTC MZ72 18ohms.
In the kit two pins(normal and under squonk-fashion). Uncovered base.
Features of good quality low price two pins ptc resistor 18ohms.
If you have two PINS cards, you can join them here.
Release the left side of the tray andconnect the remaining two pins to the hard drive.
We only needed two pins to win, and you left them both standing.
Release the left side of the tray andconnect the remaining two pins to the hard drive.
Press two pins for the edge fence(guide rule) so that the edge fence appears.
This belt is made from high quality leather,fitted with a brass buckle with two pins.
Press two pins for the edge fence(guide rule) so that the edge fence appears.
Gently bend the left side of the tray andconnect the hard drive to the two pins on the right.
Carefully insert the two pins of the new lamp into the two holes in the lamp holder.
If the tray has a disk,gently pull on the left side of the tray to unfasten the two pins.
Install the front brace by sliding the two pins into the oval tube under the front side of the seat.
Gently bend the left side of the tray andconnect the hard drive to the two pins on the right.
The divider is secured by two pins that fit into the oval holes along the top of the shelf and shelf beam.
It follows that, to get the exact damping, You"should" add a resistor,welded on the two pins of geophone.
The autocalibration facility is started by shorting these two pins together or by providing a digital low signal to pin 12.
To insert the new hard drive,gently bend the left side of the tray and connect it to the two pins on the right.
Neku can only be equipped with a maximum of two pins at the game's start; this can eventually be upgraded to a maximum of six.
Connect the two STBY pins on the REMOTE connector to the two pins of a toggle switch.
The two pins are not exactly parallel and converge slightly; their centres are 17.5 mm apart at the tip and 18.6 mm apart at the base.
The second analogue output range for all outputs is obtained by shorting these two pins together or by providing a digital low signal to pin 14.
The updated version correctly shows the majority of LCD current flowing to pin 15(the LCD pad towards the right), rather than being evenly distributed between the two pins, as was the case left image.