Приклади вживання Inlet pipe Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Stainless steel inlet pipe(60cm).
In the process of working with such a unit on the bottom of the reservoir submerged inlet pipe only.
Inspect the inlet pipe adapter on the wall or water tap.
Before starting, the entire pump body and the inlet pipe must be filled with water.
The depth of the inlet pipes in the sump pit depends on the distance from home to the treatment plant.
(1) pre separation:the dust gas discharged by the shaft kiln enters the inlet pipe of the dust collector center through the flue.
Therefore, at the inlet pipe to the house pose special filters whose inner walls are covered with an oxidizing composition.
In a simple way, the vertical filter dust collector is made up of a box, a pulse valve,a air inlet pipe and a exhaust pipe. .
Water enters in the housing by the inlet pipe, changing sharply the rate and direction of water movement.
One of the advanced features of the design of the cyclone ZOL(ЦОЛ) is that it contains an anti-suction conical element,which serves to adjust the pressure in the inlet pipe of the cyclone working to pressurize;
The water is sprayed through the water inlet pipe and the flushing nozzles in the lower part of the dust collector, and the bottom is washed.
The base of the furnace should be smooth and fixed with the brick concrete structure or the steel structure base,connecting the exhaust pipe of the blower and the bottom inlet pipe of the combustion chamber and ignition.
When the air enters the inlet pipe, the pressure is applied continuously through the air flow, then the dust in the box is filtered to the ash bucket, then the back blow is carried out and the dust is discharged from the air.
Gas stove and heating device(Autonomous boiler)It recommended to place next to the inlet pipe, and vice versa, which will eliminate the wiring space on the perimeter.
Through the inlet pipes the water flows between the reactor well and vessel downward to the reactor bottom, then in upward direction through the core removing the heat from the fuel elements(FE), and via the outlet pipes is supplied to the steam generators(4).
In a simple way the vertical filter dust collector is made up of a box a pulse valve a air inlet pipe anda exhaust pipe When the air enters the inlet pipe the pressure is applied continuously through the air flow then the dust in the box is….
The structure of the filtertype dust collector is composed of the inlet pipe, the exhaust pipe, the box, the ash bucket, the ash cleaning device, the flow diversion device, the air flow distributary distribution plate, the filter tube and the electronic control device, which are similar to the gas box pulse bag dust removal structure.
Universal union for both 50mm and 63mm pipe work(inlet).
The pressure drop means that the filter bag is damaged or loosened, the inlet side pipe is blocked or the valve is closed.
Flow dividers on the innerwall of the funnel prevents the formation of eddies at the inlet of the pipe, increasing the throughput.
The right angle electromagnetic pulse valve is characterized by a90 degree right angle of the air inlet and outlet pipe of the valve.
The center of the fixed roof has a pulp inlet, and the pipe is connected with the slurry pump.
The center of the fixed roof has a pulp inlet, and the pipe is connected with the slurry pump.
Through the extension pipe to the inlet of the turbo brush is connected with its motor on the front bumper of her lights for illuminating dark areas.
The movable roof and the fixed roof are actually equivalent to one way filter plates also called movable plugs andfixed plugs The center of the fixed roof has a pulp inlet and the pipe is connected with the slurry pump The center of the movable….
From the stainless steel multistage centrifugal pump installation technology, the suction pipe requires a strict seal condition, can not have pipe leak or leakage,otherwise it will destroy the vacuum degree at the water inlet of the pump, cause the pump water output is reduced, or it will too serious to draw water.
On each row has its own carburetor and its inlet and outlet pipes.
In single-pass PHEs, all inlet and outlet pipes are connected to the fixed plate, i.e. on the same side.
Same as with an electric water heater,you should first check the cold water inlet and hot water outlet pipes and connections to make sure they are not loose.
The overall structure of the CCJ DG impact multi tube dust collector The dust collector is divided into two parts the upper and lower boxes andthe upper box includes inlet and outlet pipes distributing air supplypipes two water retaining plates….