Приклади вживання Magnetic flux Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Then the total magnetic flux is equal to the integral of the square S.
Because ФB=BScosα, then in order to change the magnetic flux F can be changed:.
Ie magnetic flux linked with the circuit is proportional to the current I in the circuit.
Name of Nicola Tesla unit was named measure the magnetic flux density(magnetic induction).
The upwelling magnetic flux pushes through the photosphere, exposing the cooler plasma below.
Gauss's law for magnetism states that the magnetic flux across any closed surface is zero;
The discovery is based on tiny particles called paramagnons- bits that are not quite magnets,but that carry some magnetic flux.
These form a visible component of magnetic flux tubes that are formed within a star's convection zone.
The surface integral at the right-hand side of theMaxwell-Faraday equation is the explicit expression for the magnetic flux ΦB through Σ.
In most older literature, B is called the magnetic flux density or magnetic induction.
A coronal loop is magnetic flux fixed at both ends, threading through the solar body, protruding into the solar atmosphere.
A cold warm alternating bath of the thermo-magnetic elementsnow causes them to conduct or interrupt the magnetic flux alternately.
In this case, there is always a magnetic flux F passing through the surface bounded by the circuit under consideration.
The cold and warm alternating bath of thermomagnetic elementsnow causes them to alternately conduct or interrupt the magnetic flux.
As active regions are broken apart, the magnetic flux is separated into regions of positive and negative sign.
The magnetic flux linking the primary and secondary windings travels almost entirely within the iron core, with no intentional path through air.
Faraday's law of induction makes use of the magnetic flux ΦB through a surface Σ, defined by an integral over a surface:.
The magnetic flux pushes the hotter photosphere aside, exposing the cooler plasma below, thus creating the relatively dark sun spots.
NOTE A steel forging is considered to be ferromagnetic if the magnetic flux density is greater than 1 T for a tangential magnetic field strength of 2,4 kA/m.
The magnetic flux passes through the disk twice, closing through the details of the magnetic circuit 4 and forming two fluxes in the gap.
A second wire in reach of this magnetic field will experience thischange in magnetic field as a change in its coupled magnetic flux, d ΦB/ d t.
In normal operating mode, the resulting magnetic flux is zero, the current in the secondary of the differential transformer is also zero.
The work done in moving the current-carrying conductor in a magnetic field is determined by the product of the current flowing through a conductor,the change of the magnetic flux.
In normal operation, the resulting magnetic flux is zero, the current in the secondary winding of the differential transformer is also zero.
The main feature of our transformer is to obtain a traveling wave along the secondary coil, andits speed should match the speed of propagation of electromagnetic wave(magnetic flux).
On the bogies of this diesel locomotive electromagnets were installed, the magnetic flux of which passed through the wheels and rails and created the attraction of the bandages to the rail heads.
The magnetic flux levels written to the hard drive platter vary in a stochastic manner with variations in the magnetic flux related to head positioning, temperature and random error.
Because lines of force of vector is always closed,when considering the magnetic flux through a closed surface can be noted that each line, part of the surface that comes out of it.
The magnetic flux circulating in the angular direction around the nanocone apex and the pseudomagnetic flux directed orthogonally to the nanocone surface are shown to be induced in the ground state.
A magnetic filter with magnetic flux of 8000 Gauss, which eliminates foreign-metal impurities contained in the paste to be milled, ensures product purity as well as equipment safety of the next process.