Приклади вживання Pressure loss Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
There is no pressure loss.
Pressure loss: less than 0.02Mpa.
Note the pressure loss.
Pressure loss, Pa, no more than 200.
Low energy loss and low pressure loss.
(1) pressure loss and ash clearing cycle.
Smooth inner walls reduce pressure loss and increase folw speed.
Pressure loss: less than or equal to 0.02MPa(G).
Consult unread newest Problem booster wells with pressure loss.
Higher pressure loss and heat transfer.
The advantage of the method- its cheapness and simplicity, but the disadvantage- in pressure loss.
According to pressure loss and energy consumption.
Feasibility and effectiveness of measures to eliminate the pressure loss in the ventilation system;
Pressure loss and pressure pulsation in pipelines.
Sufficient designed reserve for pressure loss at maximum flow rate of gas;
Head pressure loss must also be considered when selecting a pump.
With the increase of inlet concentration,the ash deposition rate is fast and the pressure loss increases with the same filter area.
Don't forget about pressure loss, caused by resistance in the pipes.
Engines are able to withstand the influence of the environment, therefore,the service life of the filters remains long without pressure loss by installations.
Pressure loss tester for rapid checking of engine mechanical system.
In terms of technical and economic aspects, the pressure loss control range of cyclone dust collector is generally 500~ 2000Pa.
The pressure loss has decreased, which is suitable for low gas source working situations.
Otherwise, the filter bag is easy to block,the life span is shortened, the pressure loss is greatly increased, the dust removal efficiency is also reduced;
Maximum pressure loss for air density 1.2 kg/m3 at Qmax, Pa 300.
Adopts industrial large pump truck integrated valve,the line is simple, the pressure loss is small, compared to the conventional valve energy saving 17%.
Reduce the pressure loss, improve the dynamic response characteristics, eliminate the valve vibration.
Otherwise, the filter bag is easy to block,the life span is shortened, the pressure loss is greatly increased, the dust removal efficiency is also reduced;
Depending on the expediency, speed and pressure loss, the flow through the tube chamber is carried out by a single pass or multiple passes.
The rotor blades are pressurized with nitrogen gas at 10PSI toindicate the onset of a metal fatigue failure, yet no pressure loss was indicated during the pre-flight inspection.
Incorrect layout of the laying of the pipes can lead to large pressure loss, material consumption(and this increased cash costs) and weak efficiency irrigation.