Приклади вживання Soft metal Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Soft metal brush;
Gold and silver are soft metals.
Soft metals(aluminum, brass).
A relatively soft metal, it is easy to shape.
Soft metals(aluminum, brass, copper) 35 UAH.
The rotor thus clamp in a vise through soft metal gasket.
Cutting soft metals is not fast.
Work can be performed with the blunt side of a knife or a soft metal brush.
Cheap furniture mainly made of soft metal and only for short-time.
And zagotovte spanner, bearing puller, hammer, nastavku soft metal.
Potassium is a very soft metal that can easily be cut with a knife.
Come to the rescue of a vise, two metal strips and a hammer with a soft metal nastavkoy.
Punson he was pressed into the soft metal and get in-depth form letter- a matrix.
Aluminum pots can not be washed with a metal sponge- it scratches a soft metal surface.
It is ductile and soft metal with a silvery-white color with a bluish tinge, and has two isotope.
Gold is a yellow, highly lustrous and soft metal, it can be easily scratched.
The original form of"lead pencil" was the leaden stylus used by the ancient Romans, who also used it to write on wood orpapyrus by leaving dark streaks where the soft metal rubbed off onto the surface.
Using these tools, you can work not only with soft metals, but also with iron, steel or zinc.
Pins and rings of soft metal, necessary for the creation of a carcass decoration and fastening of its parts, can be found in all sorts of specialized stores, and hooks, thanks to which, in fact, the earring and keeps in the ear, you can simply take from old unnecessary or broken earrings.
In addition, a similar saw to cope with soft metals, but for this it will have to provide a special disk.
Decoration industry: acrylic, PVC, MDF, artificial stone, fiberglass, plastic,and copper and aluminum and other soft metal plate engraving and milling cutting;
On the parchment or paper this soft metal left a hardly visible light gray trace, which could be erased with a crumb.
(Victoria Regina) cyphers dated after 1901- Queen Victoria died in 1901, so any rifles made after this should be stamped"E. R"(Edward Rex, referring to King Edward VII) Generally inferior workmanship,including weak or soft metal, poorly finished wood, and badly struck markings.
In most cases,metal parts such weapons are made of soft metal alloys based on aluminum"silumin" and others.
Aluminum, although it is a soft metal, not inferior in strength steel, since the sipes are made out of it in a special way.
The keys are inserted vise or metal strip,bearings fit on the keys and using nastavki soft metal and a hammer weight of at least 400 g threshed from the shaft axis.
In particular, the pressing force when cutting soft metals must be substantially less than, product than when cutting hard metal. .
By the year 1000,longer lengths of wire were made by pulling rods of soft metal, such as alloys of lead and tin, through a die of harder metal, such as iron.
Replaceable linings are most often made of a softer metal than sponges.