Приклади вживання The solar cell Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The solar cell and its function.
So that is to show that the solar cell acts as a receiver.
The solar cell also has terrestrial applications.
And It really doesn't matter where the beam hits the solar cell.
And this is where the solar cell and the LED come in.
The solar cell powered transmitter operated for more than 6 years.
In this case, we install the roof first, and as a second layer, the solar cell.
The solar cell unit can be located both inside the car and outside.
With the printing process, the solar cell can change its shape and design very easily.
Surface structuring, which leads to a decrease in the integral coefficient of the solar cell display;
When photons hit the solar cell, they release electrons from their atoms.
But they need to pass into the load circuit, andfor this passing it is necessary to form a contact surface of the solar cell.
Fill factor is defined as the ratio of the maximum power from the solar cell to the product of Voc and Isc.[5].
Through the external circuit they give up their energy as useful work(turning motors, lighting lamps, etc.)and return to the solar cell.
Ease of maintenance and operation(just periodically wipe the dust from the solar cell, and switching on and off is done automatically).
As they flow through the external circt they give up their energy as useful work(turning motors, lighting lamps, etc.)and return to the solar cell.
As they flow through the external circuit they give up their energy as useful work(turning motors, charging batteries, for example)and return to the solar cell.
However, in polymers, and single-crystal plates have one drawback- the solar cell structure on the basis of their lack of flexibility that is needed in some cases.
In the case of integrated solar cells, at the site of construction, only one element is installed,being at the same time the envelope of the building and the solar cell.
However, in polymers, and single-crystal plates have one drawback- the solar cell structure on the basis of their lack of flexibility that is needed in some cases.
In a given hour, more energy from sunlight strikes the earth than the entire planet consumes in a year, but solar cells currently contribute less than 0.1 percent of electricity supply-- primarily as a result of cost," said Dr. David Mitzi, who leads the teamat IBM Research that developed the solar cell.
This process is known as exciton fission and means that the solar cell is able to use high energy photons from the blue-green part of the visible spectrum.
Due to its properties the p-n junction«shares», skipping each type only on its“own” half, and chaotically moving in the volume of the element charge carrier are detected on different sides of the barrier, after which it can be transmitted to the externalcircuit to generate the voltage on the load connected to the solar cell.
During testing of the solar cell measure the set of parameters, including short-circuit current, open circuit voltage, maximum power and the efficiency.
If you use a RV for a long time and travel outside, solar energy is even more important,so the solar cell charging system plays an important role in the RV.
This means we have a principalmechanism in place to receive information from the light and by the solar cell, because the fluctuations of the energy harvested correspond to the data transmitted.
We're able to do this by using organic solar cells, because they allow us to tune the spectrum of light the solar cell absorbs-- so we can focus on wavelengths of light that plants don't use.