Примери за използване на A metal garage на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
How to build a metal garage.
It would be advisable to install the simplest swing gates on a metal garage.
Now install a metal garage is finished!
Warming of the ceiling in a metal garage.
To build a metal garage with their own hands, the following materials will be needed.
How to insulate a metal garage: Stages.
Now it is necessary to learn how to insulate a metal garage.
But ideally better to build a metal garage with his hands near his home.
There are different ways to insulate a metal garage, but not all known materials are suitable for this.
In this case, it is relatively cheap andquickly possible to solve the problem by installing a metal garage.
The frame for a metal garage is most often welded, although it is possible to join parts using fasteners.
In general, it is much easier to concrete the floor for a metal garage than to do a similar job in a brick or stone building.
As we have already said, a metal garage is not considered a capital structure, it is a good opportunity to avoid paper red tape and immediately start construction work.
The most optimal and simple option for a metal garage is a natural supply and exhaust ventilation system.
A metal garage is collapsible- a more solid, stable and reliable construction, but welded buildings are built much faster and easier, and if necessary they can be quickly disassembled, transported to another location and quickly assembled.
The thickness of the cushion type of concrete slab for a metal garage should not be large- about 10-15 centimeters above ground level.
For example, if a metal garage wall and are not subject to the casing, the optimal solution will be the laying of electrical wires in a plastic box, metal hose and corrugated pipe.
With a competent layout and organization in a metal garage, you can store a lot of things, tools and even food for the winter.
For example, in a metal garage it is necessary to ground the entire garage, as well as all metal parts.
Below we will tell you about the manufacturing of a metal garage by one's own hands, as one of the simplest and inexpensive options of protection for a car.
The foundation for a metal garage should be above the ground level by at least 15 cm so that water does not get inside the room.
The simplest and most effective way to heat a metal garage is a modern wood burning stove, which is a full-fledged heater, with high efficiency and almost completely safe.
Concreting of the floor in a metal garage is much easier to implement than the floor fill in the stone structure.
The principle of building a metal garage is not very different from the generally accepted standards of most buildings.
To do this,the inner surface of a metal garage door leaf mounted crate of timber in the same way as is done in the insulation of walls and ceiling of the garage. .
Decoration Metal Garage- a tribute to practicality and….
Metal Garage- a tribute to practicality and reasonable estimates.
What attracts metal garage.
Metal garage for storage.