Примери за използване на A voltmeter на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
I measured it with a voltmeter.
Connecting a voltmeter to the circuit: recommendations.
Voltage is measured by a voltmeter.
There is also a voltmeter- a sweet wink to long gone times.
Its first product was a voltmeter.
Хората също превеждат
When using a voltmeter, the battery terminal voltage should read at least 12.6 volts.
The first product produced was a voltmeter.
A voltmeter is connected in parallel with the winding, and an ammeter is inserted into the break of one wire.
U is the voltage measured by a voltmeter, V;
We realize a voltmeter to several calibers of measure by changing the value of the additional resistance.
I have to go to my place and get a voltmeter.
With a known resistor resistance of a voltmeter, a voltage indicator is determined.
The first product they manufactured was a voltmeter.
To do this,you must be able to use a voltmeter, multimeter and oscilloscope.
In this state, the current is monitored with a voltmeter.
Measuring resistance with a voltmeter and an ammeter.
You measure the current andPD using an ammeter and a voltmeter.
The sensor's out put can be checked with a voltmeter, or observed on a scan tool.
The easiest way to identify whether the sensor is active or passive,is with a voltmeter.
Correctly connect a voltmeter will help knowledge of its structure and principles of operation.
What is needed and how to connect a voltmeter.
A voltmeter is used to measure the potential difference or amount of push between two parts in a circuit.
For troubleshooting, you must purchase a voltmeter.
A voltmeter is an instrument for measuring the potential difference between two points in an electric circuit.
Potential difference is measured by a Voltmeter.
There are no simple direct measurements,such as placing a voltmeter across the terminals, to determine the condition of the battery.
In other words, we measure voltage,which is altered by the connection of a voltmeter to the circuit.
Do not confuse a voltmeter with an ammeter, which is connected in series, because there should be a minimum resistance in it.
You can take some ancient technology like the Baghdad battery which probably was used for something like metal plating and wich you just mix chemicals and enhance the chemical reactions to they were using for this reason, andwe can take and put a voltmeter and go"Oh look, we're able to get a reading out of it!".
A voltmeter used for differential measurement need only be calibrated at a single point along its range, and that single point is zero.