Примери за използване на Boiler's на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The boiler's leaking.
You can further improve your boiler's efficiency by.
Boiler's cactus, needs replacing.
Sounds like the boiler's gonna blow.
If the boiler's good, the whole engine is good.
A menu for setting the minimum temperature at the boiler's input.
The boiler's body withstands high internal pressure.
Permit the elongation of the boiler's pressure operated components' lifetime.
A menu for setting the maximum temperature at the boiler's output.
Automatic control of the boiler's circulating pump(programmable above 40° C).
The fate of this architectural gem was sealed in the mid 90s after the breakdown of one of Niznhy Novgorod's boiler stations.
This can ensure a reduction in the boiler's energy consumption by up to 10%.
As the boiler's operation depends on electricity, it is necessary to pay attention to the uninterruptible power supply;
Minimum recommended dimensions of the boiler's combustion chamber- L х W х H.
If your boiler's 15 years old or more, it could be time to change it for a younger, greener version.
If you have children, or old or vulnerable people live with you,make sure that you do not set the boiler's temperature too high.
Often, knowing what your boiler's correct settings are can help you keep your energy bills down.
While installing a new boiler is preferable, regular checks andmaintenance can prolong an old boiler's service life.
There are several ways to measure a boiler's efficiency, and while each method uses a different calculation, they are easily understandable.
Having a wide range of modulation andbeing able to work at low power levels reduces the boiler's on/off cycles, avoiding losses due to stops.
The new control board modulates the boiler's lower thermal output to 12% and, together with the low-cost circulator, allows for significant energy savings.
Like all our new products, this thermoregulator has a beautifully shaped viewof its color display, giving a lot of information about the boiler's state and operation.
After the connection is made, the indicator on the boiler's housing lights up to indicate that the boiler has been put into operation.
The customer may easily optimize operational costs, using the expanded user interface, and setup different regimes,varying the boiler's output between 15% and 100%.
Let's say that according to the boiler's rating capacity from the manufacturer, the diameter of the chimney is recommended to be calculated from the calculation of the minimum cross-sectional area, namely 5.5 cm2 per 1 kW.
Graphics divided by hours for the current andprevious day with information about used energy and the boiler's and solar collector's circulation pumps work time.
Connection of any heating equipment, and solid fuel boilers is no exception, begin with the calculation of the heat loss of the room and the boiler's capacity.
(Optional) A high temperature pt100 sensor measures the temperature of the flue gases to rate the pollution of the boiler's heat exchanger.
Project selection- cases in Austria, Finland and the United Kingdom In Austria, when applying for co-funding, certain technical and economic criteria have to be met(heat density per running meter of the district heating pipe,district heating and boiler's efficiency).
Behind the ship's boilers.