Примери за използване на Coolants на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Resistant to oils and coolants.
Use in coolants and lubricants.
Tip: Always keep coolants handy.
Coolants for Commercial Vehicles.
Resistant to aggressive oils and coolants.
Contains coolants that effectively nourish.
Purification of oils and coolants to 6 microns;
Then learn about the toxicity andproperties of all available coolants.
Use in cleaning agents, coolants and lubricants.
Service products for water-miscible coolants.
Water-miscible coolants(mineral oil-free).
To provide a degree of protection against dust, spraying water,oil and non-corrosive coolants.
Use in cleaning agents, coolants and lubricants.
Piping system, which are transported anddistributed between consumers coolants;
The exchangers work with coolants which are compatible with copper and carbon steel.
Level sensors- Use in cleaning agents, coolants and lubricants.
Usually, OAT-based coolants will be dyed a different colour to green anti-freeze.
This includes transmission and hydraulic fluids, coolants, and of course, motor oil.
Very often manufacturers make products with a good design, butwith not so good coolants.
Fully compatible with all coolants synthetic and semi-synthetic brands HYDROWAY®;
The main advantages of induction boilers- electrical work with virtually all coolants.
Compared to other coolants it is both safe and environmental friendly, and still very efficient.
Over chopping locations convert valves andimmediate circulation of lowering oil or coolants.
Suction from machine tools of oils and coolants mixed with metal chips or other solid material.
Liquids Conductive liquids water Drinking water compressed air andgases compressed air oils and coolants.
Propane or butane are effective coolants, but form highly explosive mixtures in contact with the air.
Liquids liquids andgases water Drinking water gases oils and coolants aggressive media.
In particular in coolants, this is a problem, as the bubbles promote caviation induced wear in pumps and nozzles.
Suction from machine tools of liquids,(mainly oils and coolants mixed with metal chips or other solid material).
Some coolants are premixes, so check the label to see whether you need to add water or not.