Примери за използване на Evacuated tube на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Evacuated Tube Collectors Eldom+.
Benefits of the evacuated tube solar collectors.
Evacuated tubes of heat-tempered borosilicate glass.
What happens if one of my Evacuated Tubes is broken?
First, Evacuated Tubes are very tough, and not easily broken.
This evacuation of the gasses forms a vacuum andis the essential factor in the performance of the evacuated tubes.
FOREVERSOL Evacuated Tube Solar Collector.
This"evacuation" of the gasses forms a vacuum,which is an important factor in the performance of the evacuated tubes.
There are many types of evacuated tubes in the solar industry.
Evacuated tube collectors continue to perform even in case of one or more broken tubes.
Solar thermal panels(flat plate or evacuated tube only) providing hot water for your home.
Each evacuated tube is made up of two glass tubes made from strong borosilicate glass.
It is a maglev(magnetic levitation) line using evacuated(air-less)or partly evacuated tubes or tunnels.
Unlike other solar collectors, the evacuated tube ones can collect the sun's energy from multiple angles.
This would entail building maglev lines through evacuated(air-less)or partly evacuated tubes or tunnels.
Because the evacuated tubes are round, they serve as a passive tracking solar collector maximizing their performance.
Solar Absorption: Solar thermal energy is absorbed within the evacuated tubes and is converted into usable concentrated heat.
This means that evacuated tube water heaters can perform well even in cold weather when flat plate collectors perform poorly due to heat loss.
A beam of light was split in half andthe two beams were sent in opposite directions in an evacuated tube(vacuum conditions).
This is important because once the evacuated tube absorbs the radiation from the sun and converts it to heat, we don't want to lose it!!
ET3 Global Alliance is an open consortium of licensees dedicated to global implementation of Evacuated Tube Transport(ETT).
Due to the unique design of evacuated tube solar collectors, regular rain and windfall should keep them relatively clean and free of debris.
During manufacture this getter is exposed to high temperatures which cause the bottom of the evacuated tube to be coated with a pure layer of barium.
A coating of a barium compound used inside the evacuated tube to soak up gas molecules present during manufacture and thus maintain the integrity of the vacuum.
In 1907, Ernest Rutherford andThomas Royds demonstrated that are helium atomic nucleus by allowing the particles to penetrate the thin glass wall of an evacuated tube, then creating a discharge in the tube to study the spectra of the new gas inside.
For solar tube collectors with reflective panels, the entire circumferential surface area of the inner tube is often used to calculate absorber area,as the reflective panel is supposed to reflect light onto underside of the evacuated tube.
This barium layer actively absorbs any CO, CO 2, N2, O2, H2O andH2 out-gassed from the evacuated tube during storage and operation, thus helping to maintaining the vacuum.